Hi all,
Could anyone help me please! I have a site with an old LX controller on 7.1.4.9 and recently have had to swap the chassis. I have updated all the firmware etc but I am still having issues with the system randomly rebooting. I determined that it was an issue with something connected to the printer port so removed this but still having issues.
I have completed a system diagnostics report but unfortunately this has also taken this down. The logs show the following
VALID Restart post mortem information follows
Time Stamp : Monday Apr 03 , 11 : 12 : 29
The Restart of the Active plane was due to
a HARDWARE TRAP; a register dump follows.
EXCEPTION NUMBER : 0004
PROGRAM COUNTER : 00000068
ACCESSED ADDRESS : 00000000
INSTRUCTION REGISTER : 0000
STATUS REGISTER : 0000
HARDWARE EXCEPTION BITS : 0000
I was also connected to the maintenance port at the same time and this showed the following logs when it did go down:
WARNING-System shutdown requested by task: Emu68k
MnTftp:Thread terminate signal received
MnFileCache: waiting for thread to terminate. 18 seconds left.
MnFileCache: thread terminate signal received
0x3666c00 (HwReset): ==> WARNING: System Shutdown about to start. Reset Backup task launched and will force a reset in 2 minutes i
f shutdown fails.
0x3666c00 (HwReset): void SystemShutDown::execute() - SystemShutDown::action.ManagementLayerCoordinator ShutDown started.
Task IPMOTask being deleted while ACTIVE
IPN DBA Shutting down!!
OSA_ERROR - MnThread.cpp - 156 - Release() - (0x19922ad8) User already released this MnThread.
OSA_ERROR - MnThread.cpp - 156 - Release() - (0x19922c68) User already released this MnThread.
Any help or where I can find the issue here would help me out alot. Many thanks.