Author Topic: MSl install on an HP ProLiant DL20 Gen9 Server  (Read 1176 times)

Offline JamesMiddleton

  • New Member
  • *
  • Posts: 3
  • Country: us
  • Karma: +0/-0
    • View Profile
MSl install on an HP ProLiant DL20 Gen9 Server
« on: February 28, 2017, 06:31:58 PM »
Has anyone had trouble loading MSL onto a HP ProLiant DL20 Gen9 server?


I am trying to install a MSL 10.5.15.0.86.64 onto a HP ProLiant DL20 Gen9 server. According to the Hardware notes I need to boot the server in a Legacy boot mode; however when I make the changes in the Bios the server will not recognize any DVD or USB drives. I called HP and they will not work with me because they do not support or Recognized MSL. When I boot the MSL using the (Mitel not supported) UEFI (HP recommended) I get a prompt to add drives. At this point I am stuck, not sure what drivers I need to add?? I verified the DVD I am using is good because I can run a media on another server that works well. Any advice.


Offline martyn

  • Hero Member
  • *****
  • Posts: 688
  • Country: au
  • Karma: +10/-0
    • View Profile
Re: MSl install on an HP ProLiant DL20 Gen9 Server
« Reply #1 on: February 28, 2017, 06:34:12 PM »
Are you getting prompted for drivers or drives? You mention both, so it's not clear?

If it is drives, has the RAID card been configured if there is one?


 

Sitemap 1 2 3 4 5 6 7 8 9 10