Author Topic: Upgrade to MiVoive 8 and not IE access.  (Read 1619 times)

Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Upgrade to MiVoive 8 and not IE access.
« on: February 23, 2017, 03:42:58 PM »
Just upgraded a CX11 to MCD 8 and now I can't access with IE 11. It pops up a box with use 10 or 11 without adding to compatibility mode list. Now it was in there but I have taken it out of the list and shut down IE11 but it still keeps popping the rror up....nay ideas? Firefox works OK.
Ta

Tony


Offline MitelAvayaNortel

  • Jr. Member
  • **
  • Posts: 74
  • Country: gb
  • Karma: +0/-0
    • View Profile
Re: Upgrade to MiVoive 8 and not IE access.
« Reply #1 on: February 27, 2017, 03:34:19 PM »
In settings > compatibility view settings try unticking "display intranet sites in compatibility view"

That worked for me with 7.2 & IE proxy being set from a DNS WPAD record.

Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: Upgrade to MiVoive 8 and not IE access.
« Reply #2 on: February 28, 2017, 04:29:41 AM »
Thanks, already unticked. So no further on...anybody got any idea?

Offline MitelAvayaNortel

  • Jr. Member
  • **
  • Posts: 74
  • Country: gb
  • Karma: +0/-0
    • View Profile
Re: Upgrade to MiVoive 8 and not IE access.
« Reply #3 on: February 28, 2017, 09:18:57 AM »
Is the site using a proxy?  If so is use http 1.1 through proxy connections enabled?

Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: Upgrade to MiVoive 8 and not IE access.
« Reply #4 on: February 28, 2017, 09:25:32 AM »
No, I have IE11 on the 2012r2 server with rdp on to the server for maintenance. Its that IE11 that is giving this strange message or maybe its the Mitel itself?

Offline MitelAvayaNortel

  • Jr. Member
  • **
  • Posts: 74
  • Country: gb
  • Karma: +0/-0
    • View Profile
Re: Upgrade to MiVoive 8 and not IE access.
« Reply #5 on: February 28, 2017, 09:38:59 AM »
Is IE Enhanced Security turned on (for either users or Administrators depending on your logon?)  I'm sure it's the Mitel checking the agent string for IE that is doing it.

Offline PhoneSlayer

  • Contributer
  • *
  • Posts: 16
  • Country: us
  • Karma: +0/-0
  • I don't like jazz; too many notes.
    • View Profile
Re: Upgrade to MiVoive 8 and not IE access.
« Reply #6 on: February 28, 2017, 11:30:30 AM »
I'm able to get to MiVB 8.0 from IE 11 on a Win10. The only thing I had to do was add the address to Compatibility View. Not sure what to suggest for Server2012.

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1216
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Upgrade to MiVoive 8 and not IE access.
« Reply #7 on: February 28, 2017, 01:53:02 PM »
I find I have to place newer controllers in Trusted Sites on IE11, then set the security level for that zone to "Low".

Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: Upgrade to MiVoive 8 and not IE access.
« Reply #8 on: March 01, 2017, 10:39:41 AM »
Hi Guys, no further forward on this tried the last two tips and no difference. At least firefox works so I may just give up on IE (again)....


 

Sitemap 1 2 3 4 5 6 7 8 9 10