Author Topic: Can't join external calls MCD 8.0 PRI trunks  (Read 1847 times)

Offline Crowtalks

  • Sr. Member
  • ****
  • Posts: 282
  • Country: us
  • Karma: +8/-0
    • View Profile
Can't join external calls MCD 8.0 PRI trunks
« on: February 15, 2017, 09:35:15 AM »
Local government dispatch has caller that needs to speak to a deputy. Dispatch puts the caller on hold and calls the deputy...the deputy calls in to dispatch and when they attempt to join the calls by pressing the "add held call" key they get "CALL BARRED"

I played around with COS bits, to no avail...

I just replaced a Norstar MICS that used the same PRI and they were able to join the calls with the Norstar system, but not the new Mitel 3300

Thanks, Jim


Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1216
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Can't join external calls MCD 8.0 PRI trunks
« Reply #1 on: February 15, 2017, 09:50:49 AM »
Which COS bits have you tried? Any COR or Interconnect restrictions getting in the way?

Offline Crowtalks

  • Sr. Member
  • ****
  • Posts: 282
  • Country: us
  • Karma: +8/-0
    • View Profile
Re: Can't join external calls MCD 8.0 PRI trunks
« Reply #2 on: February 15, 2017, 11:37:20 AM »
I think we figured it out...in System Options Max CO Trunks in a Conference was set at 1. Mitel suggested I set it to 4 and try it...I will let you know...

Jim

Online ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Can't join external calls MCD 8.0 PRI trunks
« Reply #3 on: February 15, 2017, 11:37:57 AM »
I'm pretty sure that you will find that issue in one of the following:
- Interconnect Restriction
- Tenant Restrictions

Ralph


Online ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Can't join external calls MCD 8.0 PRI trunks
« Reply #4 on: February 15, 2017, 11:38:36 AM »
I think we figured it out...in System Options Max CO Trunks in a Conference was set at 1. Mitel suggested I set it to 4 and try it...I will let you know...

Jim

Yep. That too.   ::)

Ralph

Offline Crowtalks

  • Sr. Member
  • ****
  • Posts: 282
  • Country: us
  • Karma: +8/-0
    • View Profile
Re: Can't join external calls MCD 8.0 PRI trunks
« Reply #5 on: February 15, 2017, 11:54:50 AM »
As far as interconnect and tenant...all phones are set to 1 and 1

Thanks

Offline Crowtalks

  • Sr. Member
  • ****
  • Posts: 282
  • Country: us
  • Karma: +8/-0
    • View Profile
Re: Can't join external calls MCD 8.0 PRI trunks
« Reply #6 on: February 16, 2017, 07:53:01 AM »
The Max Trunk in Conference bit (default of 1) in System Options form was the issue. We set it to 4, tested it and it works.

Jim


 

Sitemap 1 2 3 4 5 6 7 8 9 10