Author Topic: SYS ALARM 132  (Read 2781 times)

Offline eia

  • Jr. Member
  • **
  • Posts: 34
  • Country: us
  • Karma: +0/-0
    • View Profile
SYS ALARM 132
« on: February 13, 2017, 12:27:27 PM »
We keep getting "sys alarm 132" on the phone displays on "some" not "all" phones.
Anyone know what this means or where I can find it in the logs? I looked at the alarm logs but didn't see any 132 alarm in there.
I did see some license  errors like "A125 ALARM Invalid Software License - Reset In 16 Minutes" in the log?
Thanks for any insight!


Offline dwayneg

  • Hero Member
  • *****
  • Posts: 612
  • Country: us
  • Karma: +29/-1
    • View Profile
Re: SYS ALARM 132
« Reply #1 on: February 13, 2017, 01:33:44 PM »
The reason you see it only on some phones is that alarms are only displayed on phones listed in SYSTEM/PHONE RELATED INFORMATION/FLAGS/ADMINISTRATOR. Alarm 132 is for INVALID OR MISSING LICENSE KEY INFORMATION.  I'd start by clicking on ABOUT/MITEL SOFTWARE LICENSE at top of screen, see if that gives you a clue.  Especially make sure none of the quantities show "X of Y" to show a X greater than the Y.

Offline eia

  • Jr. Member
  • **
  • Posts: 34
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: SYS ALARM 132
« Reply #2 on: February 13, 2017, 01:59:03 PM »
Thanks for the feedback. Indeed it seems the license isn't loaded anymore, we are checking with our vendor on this.

Offline PhoneSlayer

  • Contributer
  • *
  • Posts: 16
  • Country: us
  • Karma: +0/-0
  • I don't like jazz; too many notes.
    • View Profile
Re: SYS ALARM 132
« Reply #3 on: February 13, 2017, 04:57:00 PM »
Was the software recently upgraded? It sounds like a licensekey needs to be downloaded from AMC and installed on the PBX.

Offline eia

  • Jr. Member
  • **
  • Posts: 34
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: SYS ALARM 132
« Reply #4 on: February 15, 2017, 09:33:30 AM »
The software was upgraded around 6 months ago, we just recently see this error.
Anyhow, turns out our vendor had to reload the licenses onto the little USB key to resolve the issue...


 

Sitemap 1 2 3 4 5 6 7 8 9 10