Teledex NDC2105S-N wake-up speed dial with 3300ICP MXeIII server.

[saliou-ab]

hi saliou-ab,
   why are you putting N into the dial plan? The admin guide does not seem to say anything about N character.

For wake up call do you normally dial *19 and then after the call is connected dial more digits or you have to dial the full number at once?

Hi Petr,

I was trying that dial plan (NNNNNNNN) after the fail of the one with XXXXXXXX. I forgot it in the file In sent you.

For the wake up call I normally dial the full number at once. Not in two times, when i dial *19 and wait the line do not connects it drops, but if I dial *19xxxxxxxx (on the set) at once it connects.

Thanks a lot for assisting.

[petr.necas]

Hi saliou-ab, could you run SIP TCPDUMP ON/OFF to sniff the SIP communication and see if you get final response OK to the INVITE request? If so, then problem will not be with the dial plan, but further in the PBX setup. Unfortunately I have not experience with wake up call, so maybe somebody else will step in and provide some suggestions?

[saliou-ab]

OK Petr,

I've done the SIP TCPDUMP, here is attached the files I got from the controller.

[petr.necas]

It does not seem to be a problem of the phone setup any more, but the ICP, unfortunatelly I have never configured the Wake Up feature :-(