I don't see any **1 configured, although *19 is properly configured... Dialing *19 from the set works properly yet pressing the speed dial key does not, what happens when you press the speed call key and attempt to continue, do you get an error tone or something?
Yes you are right acejavelin,
In this Configuration file there is no **1 because I use one code at a time, *19 or **1, this time it is *19 but both of them give the same result.
When dialed on the set for example *1912308110 or **112308110 it works properly and rings at 12:30 AM both of them.
But when used as speed dial it is failing to set. For example: Let's say speed dial=sd if I press on the speed dial button and set the time like this: sd12308110 it is dropping the Configuration I can't here the usual ring as when I've set it on the phone dial pad and it is not ringing when the intended time 12:30 AM.
And if I listen to the controller's port 1754 see below what it displays:
2016-NOV-21 12:30:15 HOTEL A/Active -Info- PRIMARY #0030
WAKE-UP:1 8110 11:23 #Set Failed at Extension 8110