Author Topic: UC360 LDAP/AD Dial Plan  (Read 1752 times)

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
UC360 LDAP/AD Dial Plan
« on: June 22, 2016, 06:04:30 PM »
Is there any way to strip digits? I know you can append digits (like an 8 or 9) but is there anyway to say remove 319230 from a 10 digit number so the device only dials 4 digits?


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: UC360 LDAP/AD Dial Plan
« Reply #1 on: June 22, 2016, 06:46:14 PM »
Outbound or inbound?
What are you trying to accomplish?

Ralph

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: UC360 LDAP/AD Dial Plan
« Reply #2 on: June 22, 2016, 07:31:02 PM »
Outbound or inbound?
What are you trying to accomplish?

Ralph
When you do an AD lookup on the UC360 set, the number is always 10 digits (319-230-xxxx), but most of the users have 4 digit extensions (xxxx), the LDAP/AD Dialing Plan to strip the 319230 off when it dials a number like that from the AD listing, thus not leaving the cluster and tying up 2 trunks, one to go out and one to come back in.

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: UC360 LDAP/AD Dial Plan
« Reply #3 on: June 23, 2016, 08:28:32 AM »
So if I'm reading this correctly you need the UC360 to strip the digits.
Correct?
The PBX could do it with a loopback trunk.

Ralph

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: UC360 LDAP/AD Dial Plan
« Reply #4 on: June 23, 2016, 11:14:08 PM »
So if I'm reading this correctly you need the UC360 to strip the digits.
Correct?
The PBX could do it with a loopback trunk.

Ralph
It should be able to... it can add an 8 or whatever is needed, so I expect it could remove them as well, but the manual doesn't give any examples of how to do that.

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: UC360 LDAP/AD Dial Plan
« Reply #5 on: June 24, 2016, 04:09:03 AM »
Maybe it would be easier to use ARS to strip the digits.


 

Sitemap 1 2 3 4 5 6 7 8 9 10