Author Topic: SIP trunk configuration  (Read 2068 times)

Offline nowickj

  • Jr. Member
  • **
  • Posts: 61
  • Country: pl
  • Karma: +1/-0
    • View Profile
SIP trunk configuration
« on: June 03, 2016, 03:07:24 AM »
Hello.

I have got a new SIP trunk from local provider to test them in Me lab environment and I have a problem with configuration.
In My lab i have MiVoice Business + Micollab + MBG all is in virtual environment.

SIP Trunk with dynamic registration = registration required (communique REGISTER)
sip registrar/proxy: 10.10.10.10
from-user: 221111110@netia.integralnet.pl (221111110 is a first number from a numbering pool)
auth user name: 221111110
auth pass: qwertyu
max 3 concurrent call.
Avaliable numbers 221111110,221111111, 221111112
(for outgoing calls change "originating number" by using header  P-Asserted-Identity or Remote-Party-ID)

screen from MBG logs (out.pcap) is in Attach.
Can someone tell Me how to configure this SIP Trunk?



Offline martyn

  • Hero Member
  • *****
  • Posts: 688
  • Country: au
  • Karma: +10/-0
    • View Profile
Re: SIP trunk configuration
« Reply #1 on: June 07, 2016, 07:19:56 AM »
I'm not quite sure what you are asking here?
Any of the accredited SIP providers will have an integration guide on MoL, so that would be the first point of call. If there isn't one listed there, then getting the trunk registered based on what you have above will be a start, but unless they can provide specific Header and SDP requirements then getting calls in and out might be a bit harder!


 

Sitemap 1 2 3 4 5 6 7 8 9 10