Author Topic: SIP trunk connected by FIM Card  (Read 1766 times)

Offline nowickj

  • Jr. Member
  • **
  • Posts: 61
  • Country: pl
  • Karma: +1/-0
    • View Profile
SIP trunk connected by FIM Card
« on: April 05, 2016, 07:32:52 AM »
I have a question if is there any possibility to direct connect SIP trunk using FIM card? If Yes what kind of FIM card I must use?


Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1215
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: SIP trunk connected by FIM Card
« Reply #1 on: April 05, 2016, 08:09:55 AM »
No. a FIM card must be connected to a FIM card on the other side, either on a peripheral cabinet or an NSU. SIP is an IP protocol, so it has to connect to the controller via an IP over Ethernet interface, and a FIM port is not Ethernet.

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: SIP trunk connected by FIM Card
« Reply #2 on: April 05, 2016, 08:11:09 AM »
Via FIM, meaning Fiber Interface Module??? No, that is not possible... Assuming you mean for one of the Mitel PBX's, which use them as a semi-proprietary connection to expansion cabinets with matching FIM cards, they are not a "universal" interface like a system's IP connection.

Offline nowickj

  • Jr. Member
  • **
  • Posts: 61
  • Country: pl
  • Karma: +1/-0
    • View Profile
Re: SIP trunk connected by FIM Card
« Reply #3 on: April 05, 2016, 08:42:05 AM »
THX for answare :)
OK If i can't use FIM can I use LAN port on MXeIII to direct connect SIP trunk? I don't want to connect SIP truk to switch is connected to MX...

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: SIP trunk connected by FIM Card
« Reply #4 on: April 05, 2016, 08:53:21 AM »
Sure you can, but it is just another switch... connecting your SIP connection would be no different (logically) from connecting it to another switch, it is still going to ingress into your network/Voice VLAN.

Offline nowickj

  • Jr. Member
  • **
  • Posts: 61
  • Country: pl
  • Karma: +1/-0
    • View Profile
Re: SIP trunk connected by FIM Card
« Reply #5 on: April 05, 2016, 08:55:37 AM »
OK many thx for Your help :)


 

Sitemap 1 2 3 4 5 6 7 8 9 10