Author Topic: MSL and MiCollab Install on Hyper-V  (Read 2674 times)

Offline smack

  • Contributer
  • *
  • Posts: 10
  • Country: au
  • Karma: +1/-0
    • View Profile
MSL and MiCollab Install on Hyper-V
« on: November 12, 2015, 05:33:40 PM »
Hi all,

I am trying to help a client install MSL and MiCollab onto a hyper-V environment. MSL is on but only shows a command line. Documentation that I have found seems to indicate the presence of a GUI to be able to open the blades manager page to install MiCollab from there.

Any pointers in the right direction would be greatly appreciated!


Offline martyn

  • Hero Member
  • *****
  • Posts: 688
  • Country: au
  • Karma: +10/-0
    • View Profile
Re: MSL and MiCollab Install on Hyper-V
« Reply #1 on: November 12, 2015, 05:51:00 PM »
It sounds like you are logged in as root, rather than admin. If you log in as admin, or from root do a "su admin" then you will end up at the ASCII based GUI.

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: MSL and MiCollab Install on Hyper-V
« Reply #2 on: November 12, 2015, 06:11:09 PM »
What do you get when trying https://server ip/server-manager/
login with 'admin' and the password set at install.

Offline smack

  • Contributer
  • *
  • Posts: 10
  • Country: au
  • Karma: +1/-0
    • View Profile
Re: MSL and MiCollab Install on Hyper-V
« Reply #3 on: November 12, 2015, 06:25:27 PM »
We are now into the text based GUI, unfortunately I am trying to talk someone else through the process remotely so delays are inevitable.

Thanks for the help!

Offline dilkie

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 344
  • Karma: +11/-0
    • View Profile
Re: MSL and MiCollab Install on Hyper-V
« Reply #4 on: November 12, 2015, 08:08:11 PM »
use a browser and go to https://msl_ip/server-manager

waaaaay easier...

if you can't connect, make sure the pc with the browser is listed in "local networks".

Offline smack

  • Contributer
  • *
  • Posts: 10
  • Country: au
  • Karma: +1/-0
    • View Profile
Re: MSL and MiCollab Install on Hyper-V
« Reply #5 on: November 12, 2015, 09:56:16 PM »
Thanks guys, we had some success and then some failures. The install process went fine and was shown to install all packages 100% successfuly. On revisiting the Blades tab there were a number of package conflicts presented. All are "warnings" and not errors however so we will continue on and see where we end up!

Thanks again for the help.

Offline smack

  • Contributer
  • *
  • Posts: 10
  • Country: au
  • Karma: +1/-0
    • View Profile
Re: MSL and MiCollab Install on Hyper-V
« Reply #6 on: November 16, 2015, 12:13:52 AM »
As an aside, has anyone had experience with Skype for Business and MiCollab Integration? Documentation is fuzzy in regards to deployment other than "Manually install from email link on each PC" This is less than ideal for enterprise sites.



 

Sitemap 1 2 3 4 5 6 7 8 9 10