Author Topic: Mitel 5000 connected to a UCA server  (Read 1743 times)

RogerV

  • Guest
Mitel 5000 connected to a UCA server
« on: September 04, 2015, 11:54:49 AM »
Wi-Fi on the local network. Call lasts 30 seconds and then drops.

PBX type is 5k.

Collab Client is not going through the MBG, so the MBG packet capture will not have the SIP messaging.

A capture would need to be taken from the 5k, or the access point that the mobile is connecting.

For what should be an internal call, the 5k is responding back to us with external IP address details.

The 5k sends us the 200 OK, and the set ack's it, but that ACK is sent to the external IP, and it appears that message isn't getting to the 5k, so it sends it again.

Eventually, BYEs are sent as there is a breakdown in SIP messaging.

I 2015/09/01 16:37:01:121 [udp:1408] [d303] Received message from 10.100.100.95:5060 at 2015/09/01 17:37:01:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.100.116.108:6010;received=10.100.116.108;rport=6010;branch=z9hG4bK2128360314
From: ;tag=1410879480
To: ;tag=Mitel-5000_1498844548-993
Call-ID: 475694450
CSeq: 21 INVITE
Contact:
Allow: NOTIFY,REGISTER,REFER,SUBSCRIBE,INVITE,ACK,OPTIONS,CANCEL,BYE
User-Agent: Mitel-5000-ICP-6.0.11.95
P-Asserted-Identity: "Richard"
Content-Type: application/sdp
Content-Length: 200

v=0
o=Mitel-5000-ICP 35819184 1441143419 IN IP4 24.227.206.183
s=SIP Call
c=IN IP4 24.227.206.183
t=0 0
a=sendrecv
m=audio 6910 RTP/AVP 0
a=rtpmap:0 PCMU/8000
a=ptime:20
a=AS:30
a=sendrecv


Any help I would appreciate Thanks






Offline Tech Electronics

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2983
  • Country: us
  • Karma: +89/-1
    • View Profile
Re: Mitel 5000 connected to a UCA server
« Reply #1 on: September 04, 2015, 04:57:11 PM »
RogerV,

Alright, so we need to determine a few things before we go any further as the information provided doesn't allow us to start troubleshooting any issues you have.

First of all, I am assuming that you are using the UCA softphone Client for these calls. What device(s) is the problem happening with?

Second, we need to determine how the extension is setup in the system. Is it set for NAT or Native? System > Devices and Feature Codes > Phones > {UC Advanced Softphone} > IP Settings > NAT Address Type: NAT or Native

Third, how are you getting your SIP Capture information and where in sitting when capturing it?

That should be enough questions for now, but most likely more will come later.

Thanks,

TE

RogerV

  • Guest
Re: Mitel 5000 connected to a UCA server
« Reply #2 on: September 14, 2015, 12:52:07 PM »
Got this resolved, Thanks.

Had to disable the NAT setting on the mitel 5000


 

Sitemap 1 2 3 4 5 6 7 8 9 10