« previous next »
Pages: [1]   Go Down

Author Topic: E1 DID number with the number following the issue  (Read 1239 times)

Offline hugh

  • Contributer
  • *
  • Posts: 25
  • Country: tw
  • Karma: +0/-0
    • View Profile
E1 DID number with the number following the issue
« on: May 26, 2015, 09:30:02 PM »
Hello everyone!
 Recently, a question!
 I have a MXEII3300 6.0 SP3,there are four E1 DID.
 When a customer uses the function code Call Forwarding external,
 But the receiver can only bring out the company representative number!
 Q:
 How to modify a Call Forwarding external number, DID extension number of the receiving        end to see!
Thanks for your help !!
Logged

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2202
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: E1 DID number with the number following the issue
« Reply #1 on: May 27, 2015, 10:01:02 PM »
Check ISDN protocol for Replace External CLID value
Logged

Offline hugh

  • Contributer
  • *
  • Posts: 25
  • Country: tw
  • Karma: +0/-0
    • View Profile
Re: E1 DID number with the number following the issue
« Reply #2 on: June 01, 2015, 12:10:35 AM »
Thanks for your help !!
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10