Author Topic: No Hold and Transfer when connecting to Audiocodes  (Read 1595 times)

Offline BlackSunshine

  • Full Member
  • ***
  • Posts: 190
  • Country: us
  • Karma: +1/-0
    • View Profile
No Hold and Transfer when connecting to Audiocodes
« on: May 26, 2015, 01:28:36 PM »
I have 3300 Mivoice 7.0 MXe connected to analog trunks via Audiocodes MP-114 FXO.  I can receive inbound calls to the 3300 through the Audiocodes...I can put call on hold and transfer when call comes in to 3300.  However when I place a call outbound through Audiocodes I can't put the call on hold or transfer.  I have the SDP option "Avoid signaling hold to peer"  set to yes.  Just wondered if I have missed something or maybe call HOLD and Transfer isn't compatible on outbound calls with Audiocodes.  Any help appreciated


Offline BlackSunshine

  • Full Member
  • ***
  • Posts: 190
  • Country: us
  • Karma: +1/-0
    • View Profile
Re: No Hold and Transfer when connecting to Audiocodes
« Reply #1 on: May 29, 2015, 08:27:25 AM »
Got it fixed!!  In the Audiocodes -Tel Profile- Enable Polarity Reversal- Should be "DISABLED"


 

Sitemap 1 2 3 4 5 6 7 8 9 10