« previous next »
Pages: [1]   Go Down

Author Topic: VM to Email  (Read 2448 times)

Offline pakman

  • Sr. Member
  • ****
  • Posts: 483
  • Karma: +1/-0
    • View Profile
VM to Email
« on: March 31, 2015, 08:53:02 AM »
Hello,

I have several voicemails boxes setup to forward vm to email. This worked fine until we upgraded our exchange to 2010 I am wondering if there's anything on the PBX side that I might need to do? I don't recall ever entering the exchange info into a form. Were using the embedded vm on one of our PBX's. The email addresses haven't changed so my guess is it's something to do with the new exchange server.

Thanks,
Logged

Offline bluewhite4

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1041
  • Country: us
  • Karma: +20/-0
    • View Profile
Re: VM to Email
« Reply #1 on: March 31, 2015, 08:58:57 AM »
My guess would be that your new Exchange server needs to be set to allow unauthenticated SMTP from the phone systems IP address.
Logged

Offline martyn

  • Hero Member
  • *****
  • Posts: 688
  • Country: au
  • Karma: +10/-0
    • View Profile
Re: VM to Email
« Reply #2 on: March 31, 2015, 06:03:18 PM »
Yep, you will need to update the SMTP relay address on the MCD, and make sure that the IP address of the MCD is allowed to relay through the exchange server.
Logged

Offline JasonTL

  • Sr. Member
  • ****
  • Posts: 208
  • Country: us
  • Karma: +0/-1
    • View Profile
Re: VM to Email
« Reply #3 on: April 01, 2015, 11:54:49 AM »
I had issues after changing to a hosted exchange for a customer. I had to build a email relay server for the authentication. The MCD does not have a place to add authentication, so either your exchange server has to allow unauthenticated email or  you have a relay server in between.

Logged

Offline pakman

  • Sr. Member
  • ****
  • Posts: 483
  • Karma: +1/-0
    • View Profile
Re: VM to Email
« Reply #4 on: April 08, 2015, 09:24:54 AM »
Want to make sure I'm not missing something as my server admin says it's completely wide open with no authentication and it's still not working. Is there no form on the PBX that I need to enter in the IP address of the exchange server? I have not found one yet.

Thanks,
Logged

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2209
  • Country: us
  • Karma: +67/-0
    • View Profile
Re: VM to Email
« Reply #5 on: April 08, 2015, 09:57:02 AM »
System Options?
Logged

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5768
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: VM to Email
« Reply #6 on: April 08, 2015, 10:33:21 AM »
Are you getting any logs when it fails?

Ralph
Logged

Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: VM to Email
« Reply #7 on: April 08, 2015, 11:26:16 AM »
as per Johnp...1.System Options form.
 Enter the IP address of the default Email server in the "Email server" field
Logged

Offline pakman

  • Sr. Member
  • ****
  • Posts: 483
  • Karma: +1/-0
    • View Profile
Re: VM to Email
« Reply #8 on: April 13, 2015, 08:15:56 AM »
Thanks JohnP as I haven't had a chance to reply yet but this worked.
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10