« previous next »
Pages: [1]   Go Down

Author Topic: Maid codes not working with PMS  (Read 3153 times)

Offline SuperD

  • Contributer
  • *
  • Posts: 5
  • Country: ca
  • Karma: +0/-0
    • View Profile
Maid codes not working with PMS
« on: March 18, 2015, 05:42:55 PM »
I have a customer with a SX200 that allows maid codes to be entered at the room phone, but it does not change the status of the room, particularly in the PMS. Any suggestions as to what might be blocking the codes?
Logged

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Maid codes not working with PMS
« Reply #1 on: March 29, 2015, 10:44:45 AM »
Use the Mitel PMS Emulator and see if the Room Codes are being passed to the PMS system (which they probably are), once you can prove it to the customer they will have to go back to their PMS providor to find out why they are not processing the data properly.
Logged

Offline fifty5footer

  • Contributer
  • *
  • Posts: 11
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Maid codes not working with PMS
« Reply #2 on: April 02, 2015, 11:02:11 AM »
Are the names being updated by the PMS, when a guest checks in?
The PMS feature either works, or it doesn't!  There's nothing 'we' could do, if we wanted to, to pick and choose, which information is exchanged!
Logged

Offline SuperD

  • Contributer
  • *
  • Posts: 5
  • Country: ca
  • Karma: +0/-0
    • View Profile
Re: Maid codes not working with PMS
« Reply #3 on: June 26, 2015, 11:17:55 AM »
The PMS interface for the 200 and the VMS both work. The PMS company uses non standard maid codes, so the request was cancelled instead of pursuing a solution in vain.
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10