Author Topic: customer changing ISP need to populate new static address's where????  (Read 1380 times)

Offline Lorax77

  • Contributer
  • *
  • Posts: 16
  • Country: us
  • Karma: +0/-0
    • View Profile
I have a customer that we took over service for who is changing his ISP.  The original install was done by Mitel professional services so I am only slightly aware of what is going on, add to that my limited knowledge of the MAS and MBG.
This customer has:
CXii
vMCD
vMBG
vMAS w/MBG

I’m trying to find all the places that would have to be changed to his new block of public address’s, This is what I found so far.
In the MBG configuration tab/networkprofiles/custom configuration/ I have found:

vMBG                   ICP-Side 192.168.70.1
                              set-side 2xx.xxx.xxx.10

vMAS MBG          ICP-side 2xx.xxx.xxx.3
                              set-side 2xx.xxx.xxx.3

Is this the only place I have to change the address’s?
Do I need to do anything in the base MSL that these run on?
How will this affect the AMC?
Thanks in advance for all help.


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: customer changing ISP need to populate new static address's where????
« Reply #1 on: February 27, 2015, 04:07:08 PM »
There is going to be a couple of IP addresses to change in the MAS portion of the vMCD.

Ralph

Offline Lorax77

  • Contributer
  • *
  • Posts: 16
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: customer changing ISP need to populate new static address's where????
« Reply #2 on: February 27, 2015, 04:43:22 PM »
Ralph,

Thanks for your reply, what forms in the vMCD would those changes be made to?

I've posted this same question to the Applications forum with a little more details added.

Thanks,
« Last Edit: February 27, 2015, 04:45:03 PM by Lorax77 »


 

Sitemap 1 2 3 4 5 6 7 8 9 10