Author Topic: Mitel StreamLine Port??  (Read 2964 times)

Offline hugh

  • Contributer
  • *
  • Posts: 25
  • Country: tw
  • Karma: +0/-0
    • View Profile
Mitel StreamLine Port??
« on: February 05, 2015, 01:07:42 AM »
Hello everyone
Will the Mitel StreamLine Port,
If because of the project led to the line side short circuit;
 Cause hardware Mitel StreamLine Port atresia,
Or hardware damage?

TKS !!


Offline hugh

  • Contributer
  • *
  • Posts: 25
  • Country: tw
  • Karma: +0/-0
    • View Profile
Re: Mitel StreamLine Port??
« Reply #1 on: February 12, 2015, 04:32:31 AM »
Will?
Some people have used this product?

Offline mszodiac

  • Sr. Member
  • ****
  • Posts: 232
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: Mitel StreamLine Port??
« Reply #2 on: February 12, 2015, 11:06:25 AM »
Hugh, your question is not clear.

We use Mitel Streamline product.

Offline hugh

  • Contributer
  • *
  • Posts: 25
  • Country: tw
  • Karma: +0/-0
    • View Profile
Re: Mitel StreamLine Port??
« Reply #3 on: February 13, 2015, 02:20:44 AM »
I recently had a case need to use him!
I asked this question:
 1.) RJ21 >> 2.) 110 block >> 3.) cable >> 4.) RJ11 >> 5.) Dongle >> 6.) RJ45 >>> 7.) IP Phone.
If the power is turned on Mitel Streamline case :
4.) cable shorted, Mitel Streamline equipment damage it will happen?
« Last Edit: February 13, 2015, 02:29:15 AM by hugh »

Online ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Mitel StreamLine Port??
« Reply #4 on: February 13, 2015, 08:19:36 AM »
I think what hugh is asking is if there is a short in the wiring will it damage the equipment?

I would doubt that it would.  I don't have any experience with the product but I would thing there is circuitry that would keep it from being damaged.

Ralph

Offline hugh

  • Contributer
  • *
  • Posts: 25
  • Country: tw
  • Karma: +0/-0
    • View Profile
Re: Mitel StreamLine Port??
« Reply #5 on: February 16, 2015, 03:01:26 AM »
Thank you, Ralph,
This is what I need,
I was afraid of the construction process, engineers because the cable short circuit;
Causing equipment damage .......!
May I ask there used Mitel StreamLine engineers can give some considerations ??

Thank you for help! 

Offline mszodiac

  • Sr. Member
  • ****
  • Posts: 232
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: Mitel StreamLine Port??
« Reply #6 on: February 18, 2015, 10:00:41 AM »
I don't know of short circuits on the Streamline but we've had many units fail.  They have power but the phones would behave so strangely like not being able to pick up an IP address.

There's also logs on the streamline that show "unable to update clock" etc.

Offline hugh

  • Contributer
  • *
  • Posts: 25
  • Country: tw
  • Karma: +0/-0
    • View Profile
Re: Mitel StreamLine Port??
« Reply #7 on: February 25, 2015, 02:22:12 AM »
Thank mszodiac!
They have power but the phones would behave so strangely like not being able to pick up an IP address.
Whether this situation is a cable junction attenuation Causing it ??

Wish everyone a Happy !!

Offline mszodiac

  • Sr. Member
  • ****
  • Posts: 232
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: Mitel StreamLine Port??
« Reply #8 on: February 27, 2015, 02:54:56 PM »
It's quicker if you just swap Streamline units to see if the problem follows.

Also, the Streamline ports have to be added to the correct vlans otherwise your IP phones wont pick up an IP.

Offline hugh

  • Contributer
  • *
  • Posts: 25
  • Country: tw
  • Karma: +0/-0
    • View Profile
Re: Mitel StreamLine Port??
« Reply #9 on: March 02, 2015, 04:00:45 AM »
Thank you, mszodiac !!
Thank you for giving me valuable advice!


 

Sitemap 1 2 3 4 5 6 7 8 9 10