5000 to Axxess Networking

[IPInstaller]

We have a 5000 networked on our LAN to an Axxess. The 5000 has SIP which is connected to a hosted platform, enabling us to dial hosted extension numbers.

I am trying to work out how to access the SIP peer from the Axxess extensions but cannot.

Any ideas?

[dwayneg]

I don't completely understand how you've got this set up, but if the Axxess is truly networked to 5000 you'll be able to reach any 5000 extension from Axxess.  So if ext 1234 on 5000 is forwarded to 1234 on hosted system, dialing that ext on Axxess will still get you there.  I'd say build all the SIP destinations as phantom ext on 5000, manually fwd each to SIP host (using trunk access codes and other needed digits).  Then you can dial as ext from either 5000 or Axxess.
If there are two many to do this, use just one phantom that fwds to SIP dial tone (ext 7 = SIP trunk access code + pause).  Then you dial 7 from either system, followed by specific ext.

[IPInstaller]

Hi.

I now have this working by a bit of a work around.

Phantom created on Axxess, forwarded to phantom on 5000 which has 355 to SIP Peer. Go into Online Monitor and remove the number from the 5000 phantom. Do an import/export and you can dial out on the 5000 SIP trunks from the Axxess.

Not clean but it works!

Thanks.