Author Topic: TRACE digit modification results  (Read 3318 times)

Offline GZgidnick

  • Contributer
  • *
  • Posts: 11
  • Country: au
  • Karma: +0/-0
    • View Profile
TRACE digit modification results
« on: November 25, 2014, 07:15:02 PM »
Hi gents,

I am Mitel fellowman coming from Unify OpenScape4000 (Siemens HiPath4000) and Cisco CUCM(E).
Started with Mitel few weeks back and I am already figuring my way out through the switch.

When I test my design I am using the DGT TRACE maintenance command. It provides comprehensive information regarding the DP and routes being used and how the called party is manipulated.
This is limited to the called number though.
DGT Trace started:                                                             
00390156810 : ARS 003 +  8, ARS 003 +  8, Route (3)                             
DGT Trace completed.

On the cisco there has been similar command to test the voice translation rules used to construct the (calling) number sent based on the digit translation profiles.
Does the 3300 has any way of testing the digit manipulation result on the calling number?


Offline mszodiac

  • Sr. Member
  • ****
  • Posts: 232
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: TRACE digit modification results
« Reply #1 on: November 29, 2014, 09:45:57 PM »
You can use the CCS TRACE ENABLE command.  This will output the calls on digital trunks and XNET trunks.  It can show you the exact digits outpulsed and received.

Do not forget to run CCS TRACE DISABLE after since it can fill up the buffer.

Offline GZgidnick

  • Contributer
  • *
  • Posts: 11
  • Country: au
  • Karma: +0/-0
    • View Profile
Re: TRACE digit modification results
« Reply #2 on: December 17, 2014, 08:58:30 PM »
Does this apply to SIP trunks as well?

Offline GZgidnick

  • Contributer
  • *
  • Posts: 11
  • Country: au
  • Karma: +0/-0
    • View Profile
Re: TRACE digit modification results
« Reply #3 on: December 23, 2014, 09:50:01 PM »
Never mind, found my answer.
Yes it does apply to SIP trunks as well, with slightly different messages.

CCS Tracing is enabled for continuous output display                           
13:06:40 ROL DPN PEER AAPT1     529 29 isrm_i
         ;10;|*1#|*50*290#|*58A*Cc*2*290#|*100*P.Test*1#|
         ---|---|--------|--------------|--------------|---
           6   7     8          NSIM             9
         ----|---|--------|--------------|--------------|----
        Voice|NOR|ORDxtens|     NSIM     |TXT*24char*name|
        ---------------------------------------------------------
       
13:06:40 ROL DPN PEER AAPT1     529 28 SSRM_I                                   
           *19*Z#|*58*Ca*1*Z#|*58*CW*G\}TPCww@HHE]`#
-----------------|-----------|------------------------------------------
 LoopAvoid=25hops|Mitel Speci|Non Specified Info
 
13:06:40 ROL DPN PEER AAPT1     529 28 SSRM_I                                   
           *58*C6*001#*58*CL*E*999*290*A9992084*A# 

         
13:06:40 ROL DPN PEER AAPT1     529 16 SSRM_C  *58*C4*4*1#0385649000

           
13:06:40 RIL DPN PEER AAPT1     529 7 NIM     *51*3#                           
13:06:40 RIL DPN PEER AAPT1     529 19 NIM     *240*`XD#*51*3#*58*Ca*2#         
13:06:40 RIL DPN PEER AAPT1     529 20 NAM                                     
           *3#*166*1 2 3 4#*50*0385649000#                                     
13:06:55 RIL DPN PEER AAPT1     529 1 CCM                                       
13:06:58 ROL DPN PEER AAPT1     529 2 CRM/CIM ;30;                             
« Last Edit: December 23, 2014, 09:51:52 PM by GZgidnick »

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: TRACE digit modification results
« Reply #4 on: December 23, 2014, 11:58:52 PM »
You could also try SIP TAIL ON to see SIP messages.


 

Sitemap 1 2 3 4 5 6 7 8 9 10