Author Topic: lost connectivity between two 3300 after upgrade  (Read 1464 times)

Offline lyzard00

  • New Member
  • *
  • Posts: 3
  • Country: pr
  • Karma: +0/-0
    • View Profile
lost connectivity between two 3300 after upgrade
« on: November 22, 2014, 03:35:08 PM »
hi

i have two 3300 mxe in rls 4.1 connected each other for ipx/net.

one is label as main and second is label as gateway.
it working fine about 4 yrs. i need upgrading because phone 5330e is not supported in rls 4.1
i did the upgrade to the main and they working perfect ,one week later i did the upgrade to the gateway, here is my problem,
when the equipment is up and running, after 30 minutes I lose communication with the main.
I have to go through the serial port on the gateway and type this command: mips_reset
retrieves the connectivity for 30 minutes more.


Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1161
  • Country: us
  • Karma: +62/-0
  • Senior Chief Grunt
    • View Profile
Re: lost connectivity between two 3300 after upgrade
« Reply #1 on: November 23, 2014, 04:28:34 PM »
Bad controller chassis, specifically the MIPS processor which runs the internal L2 switch. Known issue, only fix is to replace the controller chassis.

Offline lyzard00

  • New Member
  • *
  • Posts: 3
  • Country: pr
  • Karma: +0/-0
    • View Profile
Re: lost connectivity between two 3300 after upgrade
« Reply #2 on: November 24, 2014, 10:05:47 PM »
I replace the chasis but still the same

Offline lyzard00

  • New Member
  • *
  • Posts: 3
  • Country: pr
  • Karma: +0/-0
    • View Profile
Re: lost connectivity between two 3300 after upgrade
« Reply #3 on: November 24, 2014, 10:14:40 PM »
Can i use the 4.1 backup on rls 6.0?

Offline marcolive

  • Full Member
  • ***
  • Posts: 131
  • Karma: +2/-0
    • View Profile
Re: lost connectivity between two 3300 after upgrade
« Reply #4 on: November 24, 2014, 11:00:40 PM »
Yes, there is an upgrade path from 4.1 to 6
Try this command in maintenance command : upgrade bootrom all
This wil upgrade MIPS firmware
Hope that helps!


 

Sitemap 1 2 3 4 5 6 7 8 9 10