Author Topic: Volume Level of RAD  (Read 1279 times)

Offline mleitao

  • Jr. Member
  • **
  • Posts: 41
  • Country: us
  • Karma: +0/-0
    • View Profile
Volume Level of RAD
« on: November 13, 2014, 09:55:45 AM »
We have a direct dial that we setup as a test tone that we use to test some microphones. The programmers who work with the mics are complaning that the tone is too low, is there any way to adjust the volume level of the RAD from the MCD 3300. I thought that it would be something in Class of service but I haven't been able to find anything there.

Thanks


Offline bluewhite4

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1041
  • Country: us
  • Karma: +20/-0
    • View Profile
Re: Volume Level of RAD
« Reply #1 on: November 13, 2014, 10:01:59 AM »
Other than re-recording the RAD at a higher volume, no. There are no volume adjustments within the MCD.

Offline mleitao

  • Jr. Member
  • **
  • Posts: 41
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Volume Level of RAD
« Reply #2 on: November 13, 2014, 10:08:37 AM »
@bluewhite Thanks for the quick response


 

Sitemap 1 2 3 4 5 6 7 8 9 10