« previous next »
Pages: [1]   Go Down

Author Topic: Phone lights up, does not boot, no text displayed on LCD  (Read 3027 times)

Offline maximumboost

  • Contributer
  • *
  • Posts: 5
  • Country: au
  • Karma: +0/-0
    • View Profile
Phone lights up, does not boot, no text displayed on LCD
« on: November 05, 2014, 04:44:37 AM »
I have 2 x Mitel 5224 IP phones that when plugged into a POE switch light up but do not boot the start-up firmware.
Nothing is displayed on the LCD screen.
Any suggestions?
Could the firmware be corrupt?
Is there anyway to write new firmware to the phones?
Logged

Offline NTEDave

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 502
  • Country: gb
  • Karma: +11/-0
    • View Profile
Re: Phone lights up, does not boot, no text displayed on LCD
« Reply #1 on: November 05, 2014, 07:06:05 AM »
Have they ever worked, what happens if you plug them in whilst holding the Blue Superkey/Directory button down?
Logged

Offline maximumboost

  • Contributer
  • *
  • Posts: 5
  • Country: au
  • Karma: +0/-0
    • View Profile
Re: Phone lights up, does not boot, no text displayed on LCD
« Reply #2 on: November 05, 2014, 03:11:52 PM »
One was brand new out of the box and the other was an old phone that was in use.
What does holding the Blue Superkey / Directory button do as you start-up the phone?
Logged

Offline Tech Electronics

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2973
  • Country: us
  • Karma: +86/-1
    • View Profile
Re: Phone lights up, does not boot, no text displayed on LCD
« Reply #3 on: November 05, 2014, 08:02:51 PM »
Maximumboost,

Holding down that key on boot up will start the phone up in programming mode so you can change network features on the phone.

Thanks,

TE
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10