hi experts !
i m unable to access the controller through LAN port. I can acces it through the console & i mannually redifne the RTC IP addresses also like ie.g
VxWorks Settings
================
Prompt Value
------ ----- ----
boot device auto
processor number 0
host name MITEL
file name RTR.... SOMETHNG
inet on ethernet (e) 192.168.1.2:ffffff00
inet on backplane (b) <blank>
host inet (h) <address> 192.168.1.46
gateway inet (g) 192.168.1.1
user (u) ftp
ftp password (ftp) ftp
flags (f) 0x0
target name (n) <blank>
startup script (s) <blank>
other (o) motfcc
But when i connect my pc to the LAN Port of Controller using straight through & crossover cable one by one, i was even unable to ping the controller. I assing the pc on the same subnet with the defaullt gateway of 192.168.1.1 & ip addreess of 192.168.1.46.
Is i m mising some thing. How wil I m able to ping the controller & log in to the ESM of 3300 MXE.