Author Topic: Resilient NPM  (Read 3158 times)

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Resilient NPM
« on: July 30, 2014, 12:15:02 AM »
How do I make Nupoint resilient? Do I split my ports across two 3300s or do they work just like normal IP sets?

NPM on MAS with MCD 6.0 on the 3300s.


Offline bluewhite4

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1041
  • Country: us
  • Karma: +20/-0
    • View Profile
Re: Resilient NPM
« Reply #1 on: July 30, 2014, 08:16:56 AM »
They work like normal IP sets, so just make the ports themselves resilient to another controller.

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Re: Resilient NPM
« Reply #2 on: July 30, 2014, 07:41:40 PM »
I did that, rebooted primary to simulate failover and I didn't get audio from secondary. Looks like the ports answered, just no audio. If the ports are programmed as trusted, is there somewhere in the secondary/Nupoint that I need to associate this?

Offline bluewhite4

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1041
  • Country: us
  • Karma: +20/-0
    • View Profile
Re: Resilient NPM
« Reply #3 on: July 30, 2014, 09:34:04 PM »
I'll look in the morning. Thought I took that directly out of engineering guide or something.

This is a standalone, right? Not a MAS?

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Re: Resilient NPM
« Reply #4 on: July 30, 2014, 09:35:49 PM »
It is MAS. I think I had some SDS errors messing me up. Sorting through that now and will test in a little while.

Offline bluewhite4

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1041
  • Country: us
  • Karma: +20/-0
    • View Profile
Re: Resilient NPM
« Reply #5 on: July 30, 2014, 09:36:38 PM »
Ah ok. It may not work with MAS...I've only ever done it with standalone.

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Re: Resilient NPM
« Reply #6 on: July 30, 2014, 09:50:28 PM »
It works once you get all of the SDS errors fixed.

Offline glenndmartin

  • Jr. Member
  • **
  • Posts: 35
  • Country: gb
  • Karma: +0/-0
    • View Profile
Re: Resilient NPM
« Reply #7 on: August 03, 2014, 03:33:43 PM »
Also make sure that if the res MCD is on a different subnet you add the required network into the local networks list on the MSL for MAS or Nupoint



 

Sitemap 1 2 3 4 5 6 7 8 9 10