Resilient NPM

[Mattmayn]

How do I make Nupoint resilient? Do I split my ports across two 3300s or do they work just like normal IP sets?

NPM on MAS with MCD 6.0 on the 3300s.

[bluewhite4]

They work like normal IP sets, so just make the ports themselves resilient to another controller.

[Mattmayn]

I did that, rebooted primary to simulate failover and I didn't get audio from secondary. Looks like the ports answered, just no audio. If the ports are programmed as trusted, is there somewhere in the secondary/Nupoint that I need to associate this?

[bluewhite4]

I'll look in the morning. Thought I took that directly out of engineering guide or something.

This is a standalone, right? Not a MAS?

[Mattmayn]

It is MAS. I think I had some SDS errors messing me up. Sorting through that now and will test in a little while.

[bluewhite4]

Ah ok. It may not work with MAS...I've only ever done it with standalone.

[Mattmayn]

It works once you get all of the SDS errors fixed.

[glenndmartin]

Also make sure that if the res MCD is on a different subnet you add the required network into the local networks list on the MSL for MAS or Nupoint