Connect analog telephone to 3300 MXe III via ONS ports

[nguyenhung]

Hi all,

I am using 3300 MXe III working locally with IP Phones. Now i want to connect 1 analog telephone to the ONS port.

I plugged it into every ONS port on my Mitel PBX which has 4 ONS ports and 6 LS ports but did not get a dial tone on any of them. Could you please let me know how to set up an analog telephone to work via ONS port?

I am looking forward to your quick responses.

Thank you and best regards,
Spencer

[bpone]

Hello
first you need to define them under analog telephones and there give them the extension number.
Then they should work.

     BR
 
  BPONE

[x-man]

You will need to check that the AMB is programmmed first. Use the help file.

[nguyenhung]

Hi all,

I browsed to ONS/OPS Circuit Descriptor form and choosed the Circuit Descriptor 1 with the default settings. But when I browsed Analog Sets form, I didn't see anything here. Please kindly help me this issue!

I am connecting an analog phone to port ONS 3 of Mitel 3300 MXe III (4 ONS ports and 6 LS ports) without any tone signal.

Thanks and best regards,
Spencer

[x-man]

You need to go to hardware/modules/analog services units and see if the AMB card exists in there. If it does it may need to be programmed to get it to work. See the help files.

[jrg0852]

Go To:

Hardware, Modules, Analog Services Units

Take a snapshot and attach, then we'll take it from there.

[nguyenhung]

Hi jrg0852,

This attachment is my Analog Services Units you need.

Thanks and best regards,
Spencer

[jrg0852]

OK, my friend. Click "Change" and make it unit 4, which shouldn't be a conflict, make it match Installed Type, save and you can take it from there programming the other things you were doing.

[nguyenhung]

Hi jrg0852,

Thank you so much for your kindly support!

I did already understand what I missed in my configuration progress from your instructions.

Best regards,
Spencer

[x-man]

No problem mate, glad to help...

[nguyenhung]

Dear x-man,

I am a newbie in Mitel IP-PBX, there are a lot of documents so this made me confused. After having your instructions, I know that i have to focus on which chapter or which session of the document.

Once again, thank you so much!