Author Topic: Mitel MCD 7.0 Enhancements  (Read 6280 times)

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Mitel MCD 7.0 Enhancements
« on: May 20, 2014, 08:39:38 AM »
If you have an MOL account, be sure to check out Product Bulletin PB20140012.
It describes the new features of MCD 7.0


Ralph


Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Mitel MCD 7.0 Enhancements
« Reply #1 on: May 20, 2014, 09:24:10 AM »
Well, they weren't kidding... No more SX-2000 Peripheral Bay support.

Offline dutch_tuga

  • Jr. Member
  • **
  • Posts: 85
  • Karma: +2/-0
    • View Profile
Re: Mitel MCD 7.0 Enhancements
« Reply #2 on: May 20, 2014, 11:10:27 AM »
Where did you find it? I am searching on the MKB and edocs but can't find it.

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Mitel MCD 7.0 Enhancements
« Reply #3 on: May 20, 2014, 11:20:08 AM »
It's not in the KB.   
I found it in the bulletins.

Ralph

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Mitel MCD 7.0 Enhancements
« Reply #4 on: May 20, 2014, 11:23:20 AM »
One of the things I really like is that DID Inward Dialing Modifications can be applied to a PRI.
I've used this in ver 6.0 for SIP trunks and found it to be "friggin Awesome".  No more having to use system speed dials for DID translations.

The one thing I'm not a big fan of is the new User and Device interface.
Maybe it's because I'm now so used to the old one but I found the new one to be cumbersome and annoying.

Ralph

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Mitel MCD 7.0 Enhancements
« Reply #5 on: May 20, 2014, 11:31:23 AM »
I'm with you on the DID thing, I can't believe it wan't implemented years ago... Even the SX200 has had this for some time, the system speed dial way is so archaic. Of all the changes, this is the one major thing I had been hoping to get for years.

Offline markyb73

  • Full Member
  • ***
  • Posts: 102
  • Karma: +5/-0
    • View Profile
Re: Mitel MCD 7.0 Enhancements
« Reply #6 on: May 20, 2014, 04:41:09 PM »
I'm being a bit thick here, will the DDI improvements be like a 5000, i.e just match a ddi number to a destination? or still rule based as it is in SIP?

Offline LoopyLou

  • Hero Member
  • *****
  • Posts: 556
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: Mitel MCD 7.0 Enhancements
« Reply #7 on: May 21, 2014, 08:10:53 AM »
someone mentioned no more per bay support. Is it I wonder the usual Mitel way that the bays will work but Mitel doesn't support them through any kind of testing? i.e how COV cards continued to work after they were no longer supported.

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Mitel MCD 7.0 Enhancements
« Reply #8 on: May 21, 2014, 10:13:16 AM »
It specifically states in the product bulletin that customers using SX-2000 Peripheral Bays should not upgrade to 7.0, and should find a migration solution out of them before 6.0 is end of lifed next year, so it doesn't look like it's the same thing.

Offline 127.0.0.1

  • Jr. Member
  • **
  • Posts: 31
  • Country: us
  • Karma: +2/-0
    • View Profile
Re: Mitel MCD 7.0 Enhancements
« Reply #9 on: May 21, 2014, 10:23:50 AM »
I'm being a bit thick here, will the DDI improvements be like a 5000, i.e just match a ddi number to a destination? or still rule based as it is in SIP?


Yep, just like the Axxess/5000 call routing tables where you define the DID==>Destination pairing.  It requires setting an option in the trunk attributes otherwise the trunk follows the traditional routing options.

Offline markyb73

  • Full Member
  • ***
  • Posts: 102
  • Karma: +5/-0
    • View Profile
Re: Mitel MCD 7.0 Enhancements
« Reply #10 on: May 21, 2014, 05:06:23 PM »
I am liking that.  :D

Offline ghost

  • Full Member
  • ***
  • Posts: 185
  • Country: au
  • Karma: +11/-0
    • View Profile
Re: Mitel MCD 7.0 Enhancements
« Reply #11 on: May 22, 2014, 11:27:44 AM »
I noticed that they are replacing the 5550 with a full software console aswell

Sent from my C6903 using Tapatalk


Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1214
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Mitel MCD 7.0 Enhancements
« Reply #12 on: May 22, 2014, 01:36:47 PM »
Would be great if someone could come up with an IP/SIP adapter for the old DNIC phones, like the old CITELink gateways. Seems like a shame to force longtime customers to buy all new sets just to stay current.

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Re: Mitel MCD 7.0 Enhancements
« Reply #13 on: May 28, 2014, 05:29:33 PM »

Would be great if someone could come up with an IP/SIP adapter for the old DNIC phones, like the old CITELink gateways. Seems like a shame to force longtime customers to buy all new sets just to stay current.

[cough] Cisco [cough]


Sent from my iPhone using Tapatalk

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Mitel MCD 7.0 Enhancements
« Reply #14 on: May 29, 2014, 08:36:36 AM »
Quote
[cough] Cisco [cough]

How would that be possible with DNIC phones?

Ralph


 

Sitemap 1 2 3 4 5 6 7 8 9 10