Author Topic: One user, two numbers, two handsets  (Read 3075 times)

Offline MitelAvayaNortel

  • Jr. Member
  • **
  • Posts: 74
  • Country: gb
  • Karma: +0/-0
    • View Profile
One user, two numbers, two handsets
« on: May 12, 2014, 05:06:26 AM »
Hi,

I have a user who has two numbers (local numbers so that to the outside world the user appears local to each site) who wants to be able to answer her calls at either site.

The phones are currently configured as follows

SWITCH1 -> Extension 1234
SWITCH2 -> Extension 5678

Is it possible to configure extension 1234 to have a button on it to answer 5678 (and show voicemail?)

Thanks

Stephen


Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1381
  • Country: au
  • Karma: +71/-0
    • View Profile
Re: One user, two numbers, two handsets
« Reply #1 on: May 12, 2014, 05:31:16 AM »
Are the 2 sites in a cluster?
If so you may be able to use hotdesking so that the user can login to either site. This way the messages and all programming will follow.
Then set a speed call for each local number to the hotdesk user.

Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: One user, two numbers, two handsets
« Reply #2 on: May 12, 2014, 06:19:18 AM »
Only if the sites are linked (clustered). You could then use a multicall key on each oif the phones to mirror the none prime extension. So 1234 would have a multicall for 5678 and vice versa. Also set a voicemail key if its needed (I have a sneaking suspicion that if a multicall has a voicemail then the multicall key slow blinks to show a voicemail; can't be sure though). It may be possible if the sites are networked with SIP trunks as well but that would take a bit more thinking about....

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1381
  • Country: au
  • Karma: +71/-0
    • View Profile
Re: One user, two numbers, two handsets
« Reply #3 on: May 12, 2014, 06:26:32 AM »
You would have to set a 'Message Waiting Indicator' button for the multicall to get visual voicemail notification.
Then again there is always voicemail to email  ;)

Offline MitelAvayaNortel

  • Jr. Member
  • **
  • Posts: 74
  • Country: gb
  • Karma: +0/-0
    • View Profile
Re: One user, two numbers, two handsets
« Reply #4 on: May 12, 2014, 08:25:27 AM »
Hi,

The switches are in a cluster.

I have tried adding 1234 as a key on 5678 but get the error (when applying) "The directory number cannot be configured as a key appearance because it has been already programmed in a remote node."  Do I need to put both numbers on one controller first?

Thanks

Stephen

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1381
  • Country: au
  • Karma: +71/-0
    • View Profile
Re: One user, two numbers, two handsets
« Reply #5 on: May 12, 2014, 08:47:42 AM »
Don't think multicalls work across a cluster.
You may be able to get away with setting it as a DSS/BLF instead. It will function a little differently but there will be an indication and an audible ring if programmed.

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5741
  • Country: us
  • Karma: +468/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: One user, two numbers, two handsets
« Reply #6 on: May 12, 2014, 09:39:31 AM »
as sarond suggest, this looks like a perfect fit for hot desking. 
The user simply logs into what ever phone he's sitting at.

Ralph

Offline MitelAvayaNortel

  • Jr. Member
  • **
  • Posts: 74
  • Country: gb
  • Karma: +0/-0
    • View Profile
Re: One user, two numbers, two handsets
« Reply #7 on: May 12, 2014, 02:10:47 PM »
Thanks all I got it working using a DSS/BLF key and voicemail to email.  Hotdesking would be great but a bit of a faff really with the 5312 handsets?


 

Sitemap 1 2 3 4 5 6 7 8 9 10