Author Topic: Using an MSL 10 box as a VPN Server  (Read 3784 times)

Offline markyb73

  • Full Member
  • ***
  • Posts: 102
  • Karma: +5/-0
    • View Profile
Using an MSL 10 box as a VPN Server
« on: March 27, 2014, 06:24:42 PM »
Hi,

I have a site i have installed which has an MXE III with MCD 6
Also a MAS with MBG in server-gateway mode which acts as a SIP proxy (physical)
I use the MAS server as a VPN server for remote access, we use the certificate with the VPN account.
I can connect and browse the MAS fine remotely but cannot talk to anything else although everything sits on a flat network.
If i ssh to the MAS remotely i can ping to other devices fine, but not from the remote pc (have tried multiple pc's).

Anyone have any ideas? It won't be local networks, just a bit stumped.

Thanks!


Offline Navarre

  • Jr. Member
  • **
  • Posts: 75
  • Karma: +0/-1
    • View Profile
Re: Using an MSL 10 box as a VPN Server
« Reply #1 on: March 27, 2014, 06:33:16 PM »
I have a site i have installed which has an MXE III with MCD 6
Also a MAS with MBG in server-gateway mode which acts as a SIP proxy (physical)
I use the MAS server as a VPN server for remote access, we use the certificate with the VPN account.
I can connect and browse the MAS fine remotely but cannot talk to anything else although everything sits on a flat network.
If i ssh to the MAS remotely i can ping to other devices fine, but not from the remote pc (have tried multiple pc's).

Anyone have any ideas? It won't be local networks, just a bit stumped.

Thanks!

Any chance of overlap between the vpn network and the lan network? Look at MSL's routing table.

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: Using an MSL 10 box as a VPN Server
« Reply #2 on: March 27, 2014, 10:43:33 PM »
Is the MAS Server the only gateway/router?

Online ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Using an MSL 10 box as a VPN Server
« Reply #3 on: March 28, 2014, 09:07:36 AM »
Once you're connected to the VPN you have to have a route on your PC to point to the remote networks.

Open up a CMD window on you PC and enter "Route Print".   
That will show you your IP routing. 
You may need to add a route to your PC.

Ralph

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2202
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: Using an MSL 10 box as a VPN Server
« Reply #4 on: March 28, 2014, 06:02:48 PM »
Since it PPTP, I hope your remote network ip scheme is different for what you are connecting to

Offline markyb73

  • Full Member
  • ***
  • Posts: 102
  • Karma: +5/-0
    • View Profile
Re: Using an MSL 10 box as a VPN Server
« Reply #5 on: April 19, 2014, 05:29:51 AM »
restart fixed it, thanks all.


 

Sitemap 1 2 3 4 5 6 7 8 9 10