Author Topic: Caller ID for incoming calls showing Trunk Label  (Read 4418 times)

Offline kwahodi

  • Full Member
  • ***
  • Posts: 113
  • Country: au
  • Karma: +0/-1
    • View Profile
Caller ID for incoming calls showing Trunk Label
« on: April 10, 2014, 03:13:29 AM »
Hi,

Im having this issue on a site where by incoming calls are coming up on the screens as E1 (PRI Trunk label). How can I get it to show up as the number calling?

These are my COS settings for the Trunk:

Display ANI/DNIS/ISDN Calling/Called Number - Yes
Display ANI/ISDN Calling Number Only  -  Yes
Display Caller ID on multicall/keylines - Yes
Display DNIS/Called Number Before Digit Modification - Yes

These are the COS settings for the phones:

Display ANI/DNIS/ISDN Calling/Called Number - Yes
Display ANI/ISDN Calling Number Only - Yes
Display Caller ID on multicall/keylines - Yes
Display DNIS/Called Number Before Digit Modification - Yes


I'm I missing something here? The phones are 5224. System is a cxi running on MCD 6.0 SP2

Cheers!







Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: Caller ID for incoming calls showing Trunk Label
« Reply #1 on: April 10, 2014, 03:54:57 AM »
Do you have CLIP enabled from the Carrier?
You might want to try EDT Traces to see if they are presented at the PRI level.

Offline johnkeri

  • Jr. Member
  • **
  • Posts: 56
  • Country: ca
  • Karma: +2/-0
    • View Profile
Re: Caller ID for incoming calls showing Trunk Label
« Reply #2 on: April 11, 2014, 10:47:47 PM »
The trunk label is displayed if caller ID is not available.
Sarond is right, check with the system or call your provider.

Offline LoopyLou

  • Hero Member
  • *****
  • Posts: 556
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: Caller ID for incoming calls showing Trunk Label
« Reply #3 on: April 14, 2014, 07:46:44 AM »
Agreed. If the number is not sent, you get the trunk label as a default.


 

Sitemap 1 2 3 4 5 6 7 8 9 10