« previous next »
Pages: [1]   Go Down

Author Topic: uc360 and a mitel 5000  (Read 2429 times)

Offline markdevoll

  • Full Member
  • ***
  • Posts: 120
  • Karma: +0/-0
    • View Profile
uc360 and a mitel 5000
« on: April 04, 2014, 10:43:20 AM »
anyone have step by step procedure for setting this thing up. both the 5000 end and the uc360?
Logged

Offline Hovus

  • Jr. Member
  • **
  • Posts: 77
  • Country: us
  • Karma: +3/-0
    • View Profile
Re: uc360 and a mitel 5000
« Reply #1 on: April 04, 2014, 01:54:35 PM »
I attached the guide. It has the steps layed out. Did one of these not too long ago and it was pretty simple.
Logged

Offline chrismitel

  • Jr. Member
  • **
  • Posts: 42
  • Country: gb
  • Karma: +0/-0
    • View Profile
Re: uc360 and a mitel 5000
« Reply #2 on: April 08, 2014, 05:28:09 AM »
Not sure how you got on with this but I have found it is best to upgrade to version 2 if this has not already been done as I have found problems with ver 1.  Easy to do.  Version 1 cannot be upgraded via USB but is really easy via micro SD
Logged

Offline Hoosierpapa

  • New Member
  • *
  • Posts: 3
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: uc360 and a mitel 5000
« Reply #3 on: April 25, 2014, 10:28:09 AM »
I just installed one of these and it is pretty straight forward with the guide that is attached to this thread.  I did have to upgrade the unit to get it to work and on Ver.1 you have to use either an HTTP server or SD micro card only.  After the upgrade you can do future upgrades with a usb thumbdrive.
After configuring per the document I noticed that when a DB test is ran on the save, it reports the max call setting of 4 on the SIP phone group as invalid.  The version of the system is 6.0 SP1.  Not sure why it reports as invalid.
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10