« previous next »
Pages: [1]   Go Down

Author Topic: 5320 will not take pin  (Read 3019 times)

Offline Buckles

  • New Member
  • *
  • Posts: 4
  • Country: us
  • Karma: +0/-0
    • View Profile
5320 will not take pin
« on: March 07, 2014, 02:57:00 PM »
Has anyone had an issue with the 5320 not taking the pin when first setting up the phone?  It asks me to enter pin and hold button to send and when I do that it keeps cycling the same message over and over...enter pin and hold button to send.

Please advise.
Logged

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1161
  • Country: us
  • Karma: +62/-0
  • Senior Chief Grunt
    • View Profile
Re: 5320 will not take pin
« Reply #1 on: March 07, 2014, 03:36:43 PM »
Check the programming, either the set type doesn't match or there's another MAC address already registered to that DN.
Logged

Offline jrg0852

  • Sr. Member
  • ****
  • Posts: 309
  • Country: us
  • Karma: +3/-0
  • Look out for the next tech. because it may be you!
    • View Profile
Re: 5320 will not take pin
« Reply #2 on: March 07, 2014, 03:45:33 PM »
Does this sytem use *** for the reg. code? So, ***DN, Hold
Logged

Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: 5320 will not take pin
« Reply #3 on: March 07, 2014, 03:59:44 PM »
What Lundah said. Try using set replacement code if you are replacing a set.###<DN>. Don't do this if its not a replacement.
Logged

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5741
  • Country: us
  • Karma: +468/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: 5320 will not take pin
« Reply #4 on: March 07, 2014, 04:02:03 PM »
It could also be that the phone extension is not programmed as a 5320.   It does the same thing if the wrong set type is programmed.

Ralph
Logged

Offline LoopyLou

  • Hero Member
  • *****
  • Posts: 556
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: 5320 will not take pin
« Reply #5 on: March 09, 2014, 04:05:36 PM »
Usually if a set doesn't take a pin then either the extension you are trying is not programmed or the set type is wrong. Seen lots of times someone makes a mistake and assigns 5220 rather then a 5320.
Logged

Offline Buckles

  • New Member
  • *
  • Posts: 4
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: 5320 will not take pin
« Reply #6 on: March 10, 2014, 10:06:54 AM »
Thanks for the info guys.  That's what it was.  I had the wrong type of phone at the ext.
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10