Author Topic: Place 5330 in SIP Mode  (Read 4354 times)

NewMitelUser

  • Guest
Place 5330 in SIP Mode
« on: April 16, 2008, 03:17:48 PM »
We are using an SX 200 and all of our sets our currently using Minet. I have switched one set (Mitel 5330) to SIP and received dial tone, but was unable to complete a call from the set or to the set. Does something have to be configured on our controller before the set will work using SIP?


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Place 5330 in SIP Mode
« Reply #1 on: April 17, 2008, 09:16:28 AM »
Ok, I know I'm speaking out my ignorance here (I'm almost exclusively 3300) but, I didn't think the 200ICP was SIP capable  yet.
Yes, you would have to program a SIP phone on the controller, it's not the same as a normal Mitel IP phone.  I just don't think you can do it on a 200 yet.

Ralph

NewMitelUser

  • Guest
Re: Place 5330 in SIP Mode
« Reply #2 on: April 17, 2008, 09:45:58 AM »
That would explain alot. Guess that I have some researching to do. Thanks for the response.


 

Sitemap 1 2 3 4 5 6 7 8 9 10