Author Topic: Admin Group Alarm Summary  (Read 3206 times)

Offline matthew

  • Full Member
  • ***
  • Posts: 123
  • Country: au
  • Karma: +2/-0
    • View Profile
Admin Group Alarm Summary
« on: February 06, 2014, 01:24:19 AM »
I have a two node resilient cluster. Both are MCD 6.0 SP1. On the primary node, in the Admin Group Alarm Summary, it shows both nodes as having major alarms. When I click the individual nodes, the primary node has no alarms, and the secondary has a minor alarm (BRI card that is active with no lines connected). On the secondary node, its shows things correctly - primary node Clear, secondary node Minor. How do I get the primary node to clear the major alarm indication?


Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Re: Admin Group Alarm Summary
« Reply #1 on: February 06, 2014, 07:24:16 AM »
Make sure the SNMP traps are configured properly.

Offline matthew

  • Full Member
  • ***
  • Posts: 123
  • Country: au
  • Karma: +2/-0
    • View Profile
Re: Admin Group Alarm Summary
« Reply #2 on: February 06, 2014, 11:08:42 PM »
Thanks. That didn't actually sort it out for me, but I did learn some new stuff by reading about it. It was possible in my case as I do graph some things in cacti and have SNMP enabled, so it was possible I had messed something up. What ended up straightening things out was simply disabling then re-enabling Admin Group Management on the primary node.


 

Sitemap 1 2 3 4 5 6 7 8 9 10