Author Topic: Remote Directory Number help  (Read 4434 times)

Offline SUSD

  • Full Member
  • ***
  • Posts: 128
  • Country: us
  • Karma: +0/-1
    • View Profile
Remote Directory Number help
« on: January 20, 2014, 01:38:19 PM »
This is new to me, what is Remote DN ?  Why is it used ? 
This is set up for about 30 phones/faxes in my hospital, 4025s, in various locations with CEID 102.

I need to change this phone ext 7000 to a did ext 6000, but I can't identify the circuit for the ext 7000 to change it.  It's not listed under DNI phones.  It's got to have a circuit that it's attached to?

3300 MXe  Rel 4.2 / 10.2

Thanks.


Offline wiseguy

  • Sr. Member
  • ****
  • Posts: 202
  • Country: nl
  • Karma: +6/-0
    • View Profile
Re: Remote Directory Number help
« Reply #1 on: January 20, 2014, 05:25:20 PM »
A Remote DN is a DN that is hosted on an other system within your cluster.

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5741
  • Country: us
  • Karma: +468/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Remote Directory Number help
« Reply #2 on: January 21, 2014, 06:34:14 AM »
There's a form call "Remote Directory Numbers" where you can find where numbers exist.
It will show you the cluster element number.   If you then look in the "Cluster Element" form you will see which system the Cluster Element Number belongs to.

Ralph

Offline SUSD

  • Full Member
  • ***
  • Posts: 128
  • Country: us
  • Karma: +0/-1
    • View Profile
Re: Remote Directory Number help
« Reply #3 on: January 21, 2014, 09:38:58 AM »
OK, working with 2 controllers is new to me. It makes sense now.

Appreciate it.



 

Sitemap 1 2 3 4 5 6 7 8 9 10