Author Topic: HOW TO CONFIGURE TWO 3300´S USING SIP TRUNK  (Read 6136 times)

Offline knoxs2011

  • Contributer
  • *
  • Posts: 18
  • Karma: +0/-0
    • View Profile
HOW TO CONFIGURE TWO 3300´S USING SIP TRUNK
« on: November 12, 2011, 12:01:11 PM »
HI, I have two 3300´s, they have loaded SIp trunk each one, but when I try to configure the Sip Peer assigment, appears a message "value out of bound", Every Mitel has 2 SIP trunk licenses, so I place 2 maximall call between they in the profile but nothing apperas to work.
can you writeme the steps to configure this right please.
Note. the client don want propietary licences, so I don use the IP trunks in this case.

thanks for your help.


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: HOW TO CONFIGURE TWO 3300´S USING SIP TRUNK
« Reply #1 on: November 12, 2011, 08:59:19 PM »
I just did this in our lab a couple of weeks ago.
Pretty simple.   Unfortunately I won't be near our office until Monday. 
I'll publish the Peer Profile then for you.
Until then, just try using the defaults.  If I remember correctly, that's what worked for m.

Ralph
« Last Edit: December 18, 2013, 04:02:37 PM by ralph »

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: HOW TO CONFIGURE TWO 3300´S USING SIP TRUNK
« Reply #2 on: November 14, 2011, 07:57:13 AM »
I've attached a working SIP Peer Profile that I've used for testing in my lab.

Ralph

Offline knoxs2011

  • Contributer
  • *
  • Posts: 18
  • Karma: +0/-0
    • View Profile
Re: HOW TO CONFIGURE TWO 3300´S USING SIP TRUNK
« Reply #3 on: November 14, 2011, 03:12:05 PM »
thanks Ralph by my demo equipment is in use now, and I dont have where to load the file; can you please send me print screem images for the configuration?
thanks

Offline knoxs2011

  • Contributer
  • *
  • Posts: 18
  • Karma: +0/-0
    • View Profile
Re: HOW TO CONFIGURE TWO 3300´S USING SIP TRUNK
« Reply #4 on: November 18, 2011, 11:17:44 AM »
Ralph I ytry to load the archieve to a demo equipment but it doesnt work can you please load the print screem images for the Sip Peer profile?

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: HOW TO CONFIGURE TWO 3300´S USING SIP TRUNK
« Reply #5 on: November 18, 2011, 11:24:36 AM »
I've attached a PSR recording.

Ralph

Offline knoxs2011

  • Contributer
  • *
  • Posts: 18
  • Karma: +0/-0
    • View Profile
Re: HOW TO CONFIGURE TWO 3300´S USING SIP TRUNK
« Reply #6 on: November 18, 2011, 05:10:53 PM »
well ralph continuing th eoperation, I try to load the configuration shared in the Zip archieve, buet something happen, appears a windows with a message "value out of bound" I place the Ip adrees name the Sip peer profile, comfig a trunk service, and there fore, but allway appears that message, I'm turning crazy, the equipment (both) are in the 9.0 version tey are 3300 MX both.

I dont understand wy thi configuration dont letme create the SIp Peer Profile, what can I do?

Offline knoxs2011

  • Contributer
  • *
  • Posts: 18
  • Karma: +0/-0
    • View Profile
Re: HOW TO CONFIGURE TWO 3300´S USING SIP TRUNK
« Reply #7 on: November 28, 2011, 12:14:16 PM »
Hy every body.
well my mistake was on the Network element assigment, when I place the type I assign 3300 ICP but i forgot that in this case its a SIP peering connection so I change it for Another, and began to work properlly.

thank of ryoyr collaboration my friend.

Offline Timothy

  • New Member
  • *
  • Posts: 1
  • Country: ca
  • Karma: +0/-0
    • View Profile
Re: HOW TO CONFIGURE TWO 3300´S USING SIP TRUNK
« Reply #8 on: December 18, 2013, 03:35:50 PM »
Has anyone done this through Mitel Border Gateways between two sites across the Internet? 


 

Sitemap 1 2 3 4 5 6 7 8 9 10