Author Topic: Print cmd for sx2000 to the screen  (Read 3209 times)

Offline JK

  • Contributer
  • *
  • Posts: 6
  • Country: us
  • Karma: +0/-0
    • View Profile
Print cmd for sx2000 to the screen
« on: December 06, 2013, 11:40:44 AM »
I am looking for the cmd to print to the screen on a sx2000


Online ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5768
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Print cmd for sx2000 to the screen
« Reply #1 on: December 06, 2013, 08:55:57 PM »
To print a screen?
No such animal in the 2k.
Are you looking to print the forms?
I suppose if you're just looking for screen captures you could do a simple cut an paste or use the windows snipping tool.

If you're using Procomm then you can set up a printer in windows as a print to text printer.  Use the "Generic" model of printer.
Then the command to print in the 2k is "FO <form name> instance <instance or all> /port lpr3"
Do a "show print lpr3" until you see the formprint queued up.   Then enter "en pr/n"
When the printout is done then do a <CTL-C>

Ralph

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1225
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Print cmd for sx2000 to the screen
« Reply #2 on: December 09, 2013, 10:58:41 AM »
I'm a little rusty, but I think "type" might be the command you're looking for, if for example you want to display a traffic report on the maintenance terminal screen.


 

Sitemap 1 2 3 4 5 6 7 8 9 10