Take a look at the security settings of the MBG. We had a similar issue for a customer when a tech had allowed ssh from all subnets.
Okey, checking tomorrow. I think ssh is allowed fr.o.m. all subnets.
Deactivated ssh in mas server no change.
Triyng inc call to two statuses with different prg.
If using à status with sending calls to cellphone and sphone.
The cellphone ehdu rings not sip sphone.
In the eng gl for uca i read this.
UC Advanced Engineering Guidelines Server/Gateway Mode (when co-resident with MAS) In a server/gateway mode, as in Figure 3, the UCA server (as part of MAS) sits directly on both the Company LAN and the WAN. Even though UCA is directly accessible on the network to teleworker users in this configuration, the MBG application must be configured to support RTP traffic used by remote soft phones.
Figure 6 shows all the different ports UCA requires when all the other servers shown in the figure are in the same LAN network and the UCA Clients are connecting via the MBG. Use this as a reference to determine what ports to open in the firewall when there is one between the UCA server and any of the other servers and clients shown
Does it mean to add a portforward in msl with source udp 30250 and above
to ip pbx with dest ports udp 1024 and above
using snat on or off ?
It should call the sip sphone without this using port 5060 in My head.
Time to submit à ticket and send a log using wireshark ?
Im lost.