Author Topic: License Violation  (Read 8892 times)

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
License Violation
« on: August 19, 2013, 07:22:27 AM »
I have a cluster that is in license violation and I am not sure how to make it not in violation anymore. When I look at the Application Group License Distribution form I see the node that is in violation and the DLM have the same reason "Lost Connectivity to Peer(s) (Hours since detection: 166)." None of the licenses are over allocated for any of the nodes and I can successfully perform a sync, so I would assume that the DLM can see the nodes.

Any ideas?


Offline LoopyLou

  • Hero Member
  • *****
  • Posts: 556
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: License Violation
« Reply #1 on: August 19, 2013, 07:49:56 AM »
I know you get errors if there is loss of communication to the Licence manager. Are you able to do a retrieve on the node that is in violation?

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Re: License Violation
« Reply #2 on: August 19, 2013, 07:50:59 AM »
When you say "retrieve" do you mean can I add licenses from the available pool? If so, yes.

Offline LoopyLou

  • Hero Member
  • *****
  • Posts: 556
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: License Violation
« Reply #3 on: August 19, 2013, 07:54:45 AM »
I was thinking where you go into the controller in the license and option selection>change>retrieve

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Re: License Violation
« Reply #4 on: August 19, 2013, 07:56:57 AM »
I can indeed.

Offline LoopyLou

  • Hero Member
  • *****
  • Posts: 556
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: License Violation
« Reply #5 on: August 19, 2013, 08:02:13 AM »
And the license status maintenance command still shows license violation?

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Re: License Violation
« Reply #6 on: August 19, 2013, 08:05:41 AM »
Sure does.

Offline LoopyLou

  • Hero Member
  • *****
  • Posts: 556
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: License Violation
« Reply #7 on: August 19, 2013, 08:13:24 AM »
Well if you are not in license violation on that node as you say, then its some kind of network issue between the controllers. However you also say you can do a sync which would suggest there is not a network issue between sites. hmmmm??!!???

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Re: License Violation
« Reply #8 on: August 19, 2013, 08:15:01 AM »
I guess I will have to call into support when they open up in a bit.

Site to site dialing and sync work just fine, so I don't think it is a network problem.

Offline LoopyLou

  • Hero Member
  • *****
  • Posts: 556
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: License Violation
« Reply #9 on: August 19, 2013, 08:18:14 AM »
Wonder if license retrieval uses ports not normally used in calls or syns? Would have to check the engineering guidelines. Otherwise I am scratching my head on this one.

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Re: License Violation
« Reply #10 on: August 19, 2013, 10:01:03 AM »
Turns out AMC didn't have the hardware IDs associated with the individual ARIDs after creating the GARID and syncing everything. Not sure how the licensing was working at all but after going through each controller and syncing with AMC, then syncing the GARID with AMC and doing a data sync with all of the 3300s the violation is gone (almost). For some reason the Group License Distribution form is still showing that they are in violation without a reason. Support wants to reboot those two sites to see if they are just hung up for some reason.

Offline LoopyLou

  • Hero Member
  • *****
  • Posts: 556
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: License Violation
« Reply #11 on: August 22, 2013, 08:24:29 AM »
Knew it would be something weird if you were having issues.


 

Sitemap 1 2 3 4 5 6 7 8 9 10