« previous next »
Pages: [1]   Go Down

Author Topic: vMAS 4.0SP2 NuPoint - Low Volume  (Read 2228 times)

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1381
  • Country: au
  • Karma: +71/-0
    • View Profile
vMAS 4.0SP2 NuPoint - Low Volume
« on: May 30, 2013, 08:15:25 AM »
Hi Guys,

First of all I don't have extensive experience with NuPoint.
I have recently install a vMAS server and have noticed that NuPoint is a little on the quiet side when I call the voicemail system.
Is there a way to increase the volume levels? I have had a look in the Web GUI as well as the CLI console but can't find anything obvious.

Thanks.
Logged

Offline martyn

  • Hero Member
  • *****
  • Posts: 688
  • Country: au
  • Karma: +10/-0
    • View Profile
Re: vMAS 4.0SP2 NuPoint - Low Volume
« Reply #1 on: May 30, 2013, 07:31:47 PM »
I haven't come across it being too quiet before in the deployments that I've done.

Is the problem when you call in to leave a message from the outside world, or when you are checking your messages internally? If external what type of PSTN trunks do you have?
Logged

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1381
  • Country: au
  • Karma: +71/-0
    • View Profile
Re: vMAS 4.0SP2 NuPoint - Low Volume
« Reply #2 on: May 30, 2013, 08:00:51 PM »
It happens when dialing internally to check messages.

"Hello, xx please enter your passcode"

It is not overly quiet, I don't think will be an issue. Just something I would adjust if I could.
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10