Author Topic: 5330 sets  (Read 2756 times)

Offline dh_lab

  • Jr. Member
  • **
  • Posts: 59
  • Karma: +0/-0
    • View Profile
5330 sets
« on: May 16, 2009, 10:02:37 AM »
any body knows why cannot active call forwarding profile from 5330 sets, from 5212 it is working fine, COR & COS are same as 5212 sets but from 5330 sets i cannot?

dh_lab


Offline bobcheese

  • Sr. Member
  • ****
  • Posts: 435
  • Karma: +3/-0
    • View Profile
Re: 5330 sets
« Reply #1 on: May 16, 2009, 05:02:09 PM »
Try setting the two HCI/CTI/TAPI options to allow in COS.  ;D

Offline dh_lab

  • Jr. Member
  • **
  • Posts: 59
  • Karma: +0/-0
    • View Profile
Re: 5330 sets
« Reply #2 on: May 17, 2009, 03:58:39 AM »
Attached the MSG given  , while enabling two features!

Offline bobcheese

  • Sr. Member
  • ****
  • Posts: 435
  • Karma: +3/-0
    • View Profile
Re: 5330 sets
« Reply #3 on: May 17, 2009, 12:46:22 PM »
ok, in the license & options selection form, at the bottom, make sure you have 'MiTAI/TAPI Computer Intergration to 'Yes' If this is set to 'No' it will need a reboot to take effect.

Offline dh_lab

  • Jr. Member
  • **
  • Posts: 59
  • Karma: +0/-0
    • View Profile
Re: 5330 sets
« Reply #4 on: May 21, 2009, 11:06:52 AM »
Thank you bobcheese, it works fine..

dh_lab


 

Sitemap 1 2 3 4 5 6 7 8 9 10