Author Topic: vMCD Login?  (Read 3697 times)

Offline nintendo1889

  • Contributer
  • *
  • Posts: 11
  • Country: us
  • Karma: +0/-0
    • View Profile
vMCD Login?
« on: April 01, 2013, 09:16:13 PM »
I just finished the MCD basic i&m class. I'm trying to continue my education by using the vMCD, since I can't get my hands on real hardware for awhile.

I have it up and running in vmware workstation v9 (with 1gb of ram allocated and 2 virtual cpus [the vmx by default asks for 4 cpus, but I didn't see any trouble in the dmesg log]): I can login to the terminal as root/password, and I can reach the web interface, however I can't login as system/password, root/password, administrator/password. By the way, I entered 'password' for the password during the installer. The screenshot is attached.

Any help would be highly appreciated.
« Last Edit: April 01, 2013, 10:06:25 PM by nintendo1889 »


Offline martyn

  • Hero Member
  • *****
  • Posts: 688
  • Country: au
  • Karma: +10/-0
    • View Profile
Re: vMCD Login?
« Reply #1 on: April 01, 2013, 09:24:58 PM »
You would need to be logging in as admin/password and that will get you in to the MSL interface.  :)



Offline nintendo1889

  • Contributer
  • *
  • Posts: 11
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: vMCD Login?
« Reply #2 on: April 01, 2013, 10:37:53 PM »
Thanks! I'm in the interface and assigned the MCD the next available ip and I was able to login. Is there any way to configure multiple MCD systems (for XNET or SDS) even though the MCD isn't licensed? Or will they only be configured but not be able connect to each other without licensing?

Offline martyn

  • Hero Member
  • *****
  • Posts: 688
  • Country: au
  • Karma: +10/-0
    • View Profile
Re: vMCD Login?
« Reply #3 on: April 01, 2013, 11:26:55 PM »
You will need licences to be able to do pretty well anything on the system, as try before you buy will only get a small amount of features.

Online ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: vMCD Login?
« Reply #4 on: April 02, 2013, 07:37:08 AM »
Just a reminder, you'll need to use IE to get into the PBX interface.   You're using Firefox now, which will work for the MSL interface.

Ralph

Offline martyn

  • Hero Member
  • *****
  • Posts: 688
  • Country: au
  • Karma: +10/-0
    • View Profile
Re: vMCD Login?
« Reply #5 on: April 02, 2013, 08:05:45 AM »
Thanks Ralph! Couldn't see that from my iPad.

Offline LoopyLou

  • Hero Member
  • *****
  • Posts: 556
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: vMCD Login?
« Reply #6 on: April 08, 2013, 07:45:57 AM »
Either that or see if there is a firefox extension that allows it to mimic IE. Have done this with Chrome.


 

Sitemap 1 2 3 4 5 6 7 8 9 10