Author Topic: MAS 4.0.223.0 pegging processor  (Read 2111 times)

Offline cbak999

  • New Member
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
MAS 4.0.223.0 pegging processor
« on: February 20, 2013, 10:48:18 AM »
I upgraded to MAS 4.0.223.0 from 4.0.113.0 last month. Everything has been fine. Until yesterday. At about 9:35am, the processor on the MAS server went to 100% and stayed there. I rebooted the MAS and it went down. This morning, the same thing happened. I rebooted it today, and it immediately went back to 100%. I have stopped the individual blades of MCA and Mobile Communicator and that has no affect. So how do I troubleshoot this?? With the processor pegged, dialing into voice mail sounds like a horrible cell phone call. Help! I have ruled out any issues with the VMWare ESXi host and our SAN that the machine runs on. The MAS server has 4.5GB of RAM and 2 virtual procs. Thanks!! At this point, I am thinking about reverting back to 4.0.113.0.
Chris Bak


Offline dilkie

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 344
  • Karma: +11/-0
    • View Profile
Re: MAS 4.0.223.0 pegging processor
« Reply #1 on: February 20, 2013, 11:56:16 AM »
what does "top" tell you when you log into the console?

Offline LoopyLou

  • Hero Member
  • *****
  • Posts: 556
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: MAS 4.0.223.0 pegging processor
« Reply #2 on: February 21, 2013, 08:30:59 AM »
And when you upgraded you stuck to the same size as before ( i.e it looks like you selected small business based on the CPU and RAM totals )?


 

Sitemap 1 2 3 4 5 6 7 8 9 10