Author Topic: Does anyone know if it is possible to enter a code before you "Page All"?  (Read 2024 times)

Offline valhartman

  • New Member
  • *
  • Posts: 1
  • Country: us
  • Karma: +0/-0
    • View Profile
We are looking to program a "Page All" from our 5320's, 5304's and 5340 Model phones on a 5000 System. Since the 5304's are in our Classrooms, we want some sort of 'protection' so students don't mess with page all.   I know how to program the Page All button, but wondering if we can apply a code before pressing the button on the phone.

Idea's and thoughts welcome! Thanks so much!

Val


Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Does anyone know if it is possible to enter a code before you "Page All"?
« Reply #1 on: February 04, 2013, 01:40:59 PM »
I am not aware of any way to do that... it sounds like you on the 5304's you probably shouldn't program a button and just tell staff they they need to dial 7-0 (or whatever your "All Call" group is).

Offline DND ON

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 908
  • Country: us
  • Karma: +23/-0
    • View Profile
Re: Does anyone know if it is possible to enter a code before you "Page All"?
« Reply #2 on: February 04, 2013, 03:45:38 PM »
Enable the system flag “Special Key Required for Feature Code Entry”, which is always a good idea.

Don’t put a page key on the phones, and use the page feature code plus page zone.

Using Ace’s example, users would need to dial SPCL 7-0 to page.


 

Sitemap 1 2 3 4 5 6 7 8 9 10