Author Topic: CX - CXi  (Read 1838 times)

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
CX - CXi
« on: February 06, 2013, 12:28:52 AM »
Anyone know if there is a true hardware difference between the 3300 and 200?


Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: CX - CXi
« Reply #1 on: February 06, 2013, 01:54:07 AM »
I have been told by tech support that purely hardware wise, they are virtually identical, however, the firmware and low-level code in the various pieces of hardware are different and not interchangeable or even capable of being "flashed" between the two platforms. I tested this with an Analog Main Board a few years back... lets just say it was sent back as "Bad out of box" and leave it at that.

Offline LoopyLou

  • Hero Member
  • *****
  • Posts: 556
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: CX - CXi
« Reply #2 on: February 06, 2013, 07:24:03 AM »
Don't think so other then the obvious ( L2 switch ). No point in their being hardware differences for Mitel. Would just mean more parts to stock and higher manufacturing costs.

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: CX - CXi
« Reply #3 on: February 06, 2013, 08:16:16 AM »
The analog boards are the same part and should be interchangable.


 

Sitemap 1 2 3 4 5 6 7 8 9 10