Author Topic: Plane B Winch alarm in Sx2000  (Read 3420 times)

Offline Jack Xu

  • Contributer
  • *
  • Posts: 28
  • Karma: +0/-0
    • View Profile
Plane B Winch alarm in Sx2000
« on: January 10, 2013, 01:22:20 AM »
Hi..  i have've got a sx2000 system , recently there 's a "Plane B Winch" alarm , and there's a big red "X" from the console.... could anyone give me any advice that what's the alarm? Thanks..


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Plane B Winch alarm in Sx2000
« Reply #1 on: January 10, 2013, 06:15:06 AM »
Odds are good that your Plane B hard drive is down and no longer works.

In maintenance commands enter "Show Fault Alarm"   and post what it says here.

Ralph 


Offline Jack Xu

  • Contributer
  • *
  • Posts: 28
  • Karma: +0/-0
    • View Profile
Re: Plane B Winch alarm in Sx2000
« Reply #2 on: January 10, 2013, 10:35:16 AM »
Ralph,there's hardware fault info.  when enter "Show Fault alarm",but i could not find anything wrong except the big red X on console.  i've switched to plane A manually and enable the switch freeze in case the PBX go down .  i'm wondering if its the Mainboard issue?

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Plane B Winch alarm in Sx2000
« Reply #3 on: January 10, 2013, 06:53:05 PM »
When you switched to plane A did Plane B come up ok?

Ralph

Offline Jack Xu

  • Contributer
  • *
  • Posts: 28
  • Karma: +0/-0
    • View Profile
Re: Plane B Winch alarm in Sx2000
« Reply #4 on: January 11, 2013, 11:41:59 AM »
yes. when i switched to plane A,the plane B restarted, i could not find any alarms anymore.

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Plane B Winch alarm in Sx2000
« Reply #5 on: January 11, 2013, 02:50:52 PM »
That may have solved the problem.
Do a backup to the hard drive (both of them) and then be sure you can do one to the RSD.
If there's a problem with the hard drive a backup should prove it.

Ralph



 

Sitemap 1 2 3 4 5 6 7 8 9 10