Author Topic: Can I access the HTML page of the 5330 set in Minet mode  (Read 3469 times)

NewMitelUser

  • Guest
Can I access the HTML page of the 5330 set in Minet mode
« on: January 19, 2009, 02:54:16 PM »
I would like to configure my Mitel 5330 sets, so that I can access them using a web browser. I have converted one of the sets to run using the SIP protocol and was then able to access the built in website of the phone and was able to program buttons to display RSS Feeds. The problem was that once the set was converted, I didn't have any dial tone, and could not receive calls. I discovered that this was because the SX 200 does not support the SIP protocol, so now I am wondering if I can do the same thing using the Minet protocol.
« Last Edit: May 07, 2012, 09:32:11 AM by ralph »


Offline chadmaynard

  • Jr. Member
  • **
  • Posts: 61
  • Karma: +1/-0
    • View Profile
Re: Can I access the HTML page of the 5330 set in Minet mode
« Reply #1 on: January 19, 2009, 09:39:56 PM »
No. There is no reason to do that without SIP. Configuration is done via the PBX.


 

Sitemap 1 2 3 4 5 6 7 8 9 10