Author Topic: 5310 conference unit with 5220 phone  (Read 4071 times)

gatorIT

  • Guest
5310 conference unit with 5220 phone
« on: January 06, 2009, 10:26:41 AM »
We have a Mitel 5310 conference unit paired with a 5220 IP phone.  It was working at one point but stopped.  We ordered a replacement 5310 unit (we now have two) but are still not able to get it to work.  We have tried the conference unit with a different 5220 IP phone as well.

The 5310 unit will power on, but after a second or two the the power light turns off. 

The only thing we haven't tried is a new power supply for the 5310. 

Does anyone have any thoughts or recommend where we could purchase a new power supply?


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: 5310 conference unit with 5220 phone
« Reply #1 on: January 06, 2009, 01:56:15 PM »
This should be supply stock for any Mitel dealer.  Did you try where you got the 5310?  If you can't get it there PM me and I'll see if I can get you hooked up. 

Ralph

« Last Edit: March 31, 2014, 08:06:31 AM by ralph »

Offline Chakara

  • Hero Member
  • *****
  • Posts: 607
  • Karma: +2/-0
    • View Profile
    • Kyle Petree
Re: 5310 conference unit with 5220 phone
« Reply #2 on: January 06, 2009, 10:42:51 PM »
  Check the revision of the phone - it has to be above D.8.  The version is on the label on the back of the phone.  I've seen the exact symptom several times....

-Chak


 

Sitemap 1 2 3 4 5 6 7 8 9 10