Author Topic: SIP 404 error message on incoming call  (Read 7483 times)

Offline Houcine

  • New Member
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
SIP 404 error message on incoming call
« on: November 28, 2012, 09:05:19 AM »
Hi,

I would appreciate if someone could help me to understand why the ICP 3300 version 8.0.9.20 replies with error message "SIP 404 Not Found" when receiving a SIP INVITE from an AudioCodes SBC. Below is the SIP INVITE sent by the SBC:

2012-11-28  12:56:04  Network->STS  SSP   Level = 3   Unique ID = 0
INVITE sip:7110@icpcx1.ns.local;user=phone SIP/2.0
Via: SIP/2.0/TCP icpcx1.ns.local;branch=z9hG4bKac498656658;alias
Max-Forwards: 10
From: "Mendez Stéphane" <sip:6307@172.16.0.81;user=phone>;epid=43FEAACF89;tag=1c498140676
To: <sip:7110@icpcx1.ns.local;user=phone>
Call-ID: 4980303582811201212558@172.16.0.95
CSeq: 1 INVITE
Contact: <sip:icpcx1.ns.local:5060;user=phone;transport=tcp;ms-opaque=884b02dcc7ca77cd>
Supported: 100rel
ALLOW: ACK
Allow: CANCEL,BYE,INVITE,PRACK,UPDATE
User-Agent: Audiocodes-Sip-Gateway-Mediant 1000 - MSBG/v.6.40A.045
Content-Type: application/sdp
Content-Length: 336

v=0
o=- 497378275 497359858 IN IP4 172.16.0.95
s=session
c=IN IP4 172.16.0.95
b=CT:1000
t=0 0
m=audio 8210 RTP/AVP 97 101 13 0 8
c=IN IP4 172.16.0.95
a=label:Audio
a=sendrecv
a=rtpmap:97 RED/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=rtpmap:13 CN/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=ptime:20

And below is the error returned by the Mitel:

2012-11-28  12:56:04    SSM   Level = 3   Unique ID = 0
MSG RCVD:
Type: AuxMsg
Code: SpIdQueryReq
Evnt: EventAuxFail
2012-11-28  12:56:04    SSM   Level = 3   Unique ID = 0
MSG SENT:
Type: SP_Event
Code: ClientErrResp
2012-11-28  12:56:04    SSM   Level = 3   Unique ID = 0
SESSION INFO:
sessId: 0x165bcd90,state: StateEarlyInInviteCancelledWaitForAck,objId: 0xa07f,ltmId: 0x0,appId: 0x3,
event: 76,DMCause: 0,SSPCause: 404,PrackReqrd: Unknown
2012-11-28  12:56:04  App -> SSP  SSP   Level = 3   Unique ID = 0


Event Type : ClientErrResp
Call Object Id : 41087
Session Id : 0x165bcd90, Application ID : 3, Unique ID : 0
Request Type : 19
Reason Phrase :
Response Code : 404
Warning Code : 0  Warning Text :
Authentication Indicator : UndefinedTypeSecAgree Indicator : SecAgreeNoneSecurity Indicator : SecurityNone100rel Indicator : 100relNone
Min-Expires Value : 0

2012-11-28  12:56:04  STS->Network  SSP   Level = 3   Unique ID = 0
SIP/2.0 404 Not Found
Via: SIP/2.0/TCP icpcx1.ns.local;received=172.16.0.95;branch=z9hG4bKac498656658;alias
From: "Mendez Stéphane" <sip:6307@172.16.0.81;user=phone>;tag=1c498140676;epid=43FEAACF89
To: <sip:7110@icpcx1.ns.local;user=phone>;tag=0_2960709008-60221170
Call-ID: 4980303582811201212558@172.16.0.95
CSeq: 1 INVITE
Contact: <sip:Icpcx1.ns.local>
Content-Length: 0

The architecture is as follow:

Mitel IP Phones <-> SIP <-> ICP 3300 <-> SIP <-> AudioCodes SBC <-> SIP <-> Lync 2010 Server

The full Mitel log is attached to this post.

Thanks for your assistance. Have a good day


Offline martyn

  • Hero Member
  • *****
  • Posts: 688
  • Country: au
  • Karma: +10/-0
    • View Profile
Re: SIP 404 error message on incoming call
« Reply #1 on: December 02, 2012, 10:13:13 PM »
Nothing stands out from the logs there with a quick look.

Is there any chance of upgrading this system to at least 4.1 where SIP functionality was greatly improved and resolved a lot of issues?

Offline Houcine

  • New Member
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: SIP 404 error message on incoming call
« Reply #2 on: December 04, 2012, 11:37:53 AM »
Thx for your feedback. Unfortunately it is not possible to upgrade this ICP 3300 (no more support contract).


 

Sitemap 1 2 3 4 5 6 7 8 9 10